QingQi Qlink XF XP 200 GY Luggage Rack order...

[terrano33]

pulse adrenalin
uk
luggage rack and top box

[yvrgy200]

Hi Carl,
Please put me in for 2
2009 and 2010 Konker SM200 same as Qlink 200

[SuperTimmy]

Are the racks still available? I have a QLINK XF200. Let me know, I would love to get one!

[humanbeing]

Buy via agents
http://item.taobao.com/item.htm?id=3338882754

Whosesale (at least 20 racks per order) Y55 @ http://item.taobao.com/item.htm?id=10832146237

[SuperTimmy]

Any advice on how to find a good agent? Also, would the cost exceed the benefit in you opinion humanbeing? Thanks for the info. I have read a little about taobao, but have not gone further than that. Thanks...

[fsj]

Are these racks still available?

[DrewsBrews]

How about I inject some life into this long dead thread. In case there are any more of these bikes still kicking and riders still interested in a rack..

Getting my xf200 back on the road after years in mothballs. I just had a rack shipped in for a Yamaha xt250 (Rather than the xt225). Fully expected to require some modification or make new mounting brackets at least.. But the dang thing seems to be a direct bolt-on with the included brackets and hardware! Everything is just on finger tight at the moment. I know I'll need to cut into the side panel bodywork to clear the forward mounts, but I'm not anticipating much more than that.

[barnone]

Where did you get the luggage rack? I need one for my 2022 DF250RTG. I would like to see if it can be modified to fit my bike.

[DrewsBrews]

I got it on ebay for about $70 shipped from within the US (the cheaper ones gotta cross the ocean first) but can get it on amazon too. Just search for "xt250 rack" and it is one of the more prevalent ones for that bike right now.

I got a look at the DF250RTG. You probably need something with longer horizontal bars to mimic the factory grab bar and attach where it does (in place of it).
Something more like this for example. https://www.ebay.com/itm/38553171996...Cclp%3A2047675

[DrewsBrews]

I finally got other items finished on the bike and got this buttoned up. I hard mounted a Harbor Freight 3800 box to it with some 1/4-20 elevator bolts and lock nuts. I did stack some washers behind the rack rear mounts to add extra spacer to clear the fender bodywork, but that is it besides the rest of the included rack hardware. Used a small holesaw in a few places on the side panels to open access to the rear rack mounts.