Results 1 to 10 of 39
|
-
#1 Engine Break-in - How did you do it?
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
02-24-2011, 10:41 PMI recently found this great web site - and In Fact it is how I break in all my NEW Engines, but I want to to hear from you guys! How did you break-in your new engine? Did you follow the user manual - Or did you ride it like you stole it? LMAO Lets hear about it! Here is the article / Website:
http://www.mototuneusa.com/break_in_secrets.htm
Andrew
-
#2 Re: Engine Break-in - How did you do it?02-25-2011, 01:30 AM
Still not quite buying that method is appropriate for Chinese bikes, as the manufacturing methods here are not like what he mentions. He's talking about "modern" manufacturing methods and not the 25 year old technology used in most bikes here. That said, I've never babied any of my bikes in their early life, just avoided long bouts of high RPM running.
Cheers!
ChinaV
-
#3 Re: Engine Break-in - How did you do it?02-25-2011, 03:22 AM
Quite interested in this topic, as I'll get the bike soon.
I already heard and read about the "hard break-in" theory, or at least a normal break-in period, without going too high in the RPM for too long, but not necessarly always under a given number of RPM, just as long as you often change the RPM, not only same RPM over a long run (highway cruising for example).
What do you guys recommend, what did you do for you bikes, and what results can you see ?
-
#4 Re: Engine Break-in - How did you do it?02-25-2011, 03:33 AM
After upgrading to 150cc cylinder, replaced rings and piston, I rode a few kilometres to a hill and climb hill with full throttle. Changed oil after 30km. That was how I break in my GS150. It has been running OK.
Inspired by the theory, I also ride a 110cc pitbike, hard on engine early, the engine runs OK.
-
#5 Re: Engine Break-in - How did you do it?02-25-2011, 01:47 PM
All the methods might work but I have been going for the easy break in for the last 50+ years.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#6 Re: Engine Break-in - How did you do it?
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
02-25-2011, 02:31 PMHere's an intresting Video Part 1 Be sure and watch all PARTS:
http://www.youtube.com/watch?v=q_Y1hDgBJ7Y
Andrew
-
#7 Re: Engine Break-in - How did you do it?02-27-2011, 02:54 AM
So the first 20 miles are really that important? I was under the impression that the break in period was more like the first 500km's.
Like Fred, i'm soon to buy my first bike and interested in this issue.
There's a lot of opposing ideas, i'm still thinking i'll take it slow n steady for the first few hundred K's. No prolonged bouts on the revs, but i might stretch it a little in 2nd and 3rd during the first few days of use. That's seems a balanced mix of the two trains of thought...
I'd be interested to learn what ZMC says on the matter, and how he broke n his Raptor 250G.
-
#8 Re: Engine Break-in - How did you do it?
- Join Date
- Jan 2011
- Location
- UK
- Posts
- 38
02-27-2011, 12:17 PMI just ride sensibly.
On my gsxr600 I had, I just rode around, varying revs. Once I hit 300miles, I wound her up once to about 10,000rpm, then back to normal sensible riding.
On my pulse I am just riding it. Only riding in 30/40mph zones, although 40mph is 6000rpm which is about the manuals limit, I am not too worried. At the end of the day I am not looking for 1bhp more power because of the run in, its only a 125, just want it to last. Even once it is run in, I wont be going much over 6000 rpm, no point on the route I ride.
-
#9 Re: Engine Break-in - How did you do it?
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
02-27-2011, 02:23 PMBarnone - Your telling your Age! But glad that method has worked for you. How many bikes you got now? 6? 7? hahhahahaha. I'll probably take it in the middle of both methods.....I wonder How BoostCrazy broke in his XF. Having gotten 20HP with his Mods, I'm guessing he broke it in Hard......
-
#10 Re: Engine Break-in - How did you do it?02-27-2011, 02:55 PM
I think BoostCrazy needs to recalibrate his dyno. No way the XF200 will make 20 rear wheel HP with just jets and can. BTW, He bought his XF200 used.
Take all HP,MPG,fishing claims with a grain of salt.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
« Previous Thread | Next Thread » |
Similar Threads
-
Need new engine
By justas696661 in forum Dirt n' Dual-SportReplies: 10Last Post: 01-16-2011, 11:38 PM -
Engine Break-in/ Cold Weather
By wanglong in forum StreetReplies: 0Last Post: 10-03-2010, 02:13 AM
A Working VPN Solution?
04-11-2024, 03:10 AM in Off Topic Discussions