Anyone here move move thier needle valve to the 4th position? I did mine today, becuase it was recommeneded by so many others. The screws on the top all stripped out. After fighting with getting them all out, i got down to pulling the top off and sleeve out, moved the clip to the 4th position as recommend. Now heres the kicker question - The plate in the bottom of the sleeve can actually go in one of two ways. One covering the 3rd hole in the bottom of the sleeve or 2 Not covering the hole. I Choose to NOT Cover that hole based upon the pictures in the protguees manual. Got it all back togather and going to wait and see what anyone has to say about this before dumping gas in her. I belive I did this correctly but want to hear from anyone who has done this? Barnone? anyone.

PS I replaced all the screws with Allen Head screws

m5-.80x12 is the size for the top screws - got them at Tractor Supply.
They work perfect!


Thanks All!

Andrew