Results 1 to 3 of 3
|
-
#1 Qlink XF200 SuperMoto Carb ??????'s
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
03-14-2011, 10:18 PMAnyone here move move thier needle valve to the 4th position? I did mine today, becuase it was recommeneded by so many others. The screws on the top all stripped out. After fighting with getting them all out, i got down to pulling the top off and sleeve out, moved the clip to the 4th position as recommend. Now heres the kicker question - The plate in the bottom of the sleeve can actually go in one of two ways. One covering the 3rd hole in the bottom of the sleeve or 2 Not covering the hole. I Choose to NOT Cover that hole based upon the pictures in the protguees manual. Got it all back togather and going to wait and see what anyone has to say about this before dumping gas in her. I belive I did this correctly but want to hear from anyone who has done this? Barnone? anyone.
PS I replaced all the screws with Allen Head screws
m5-.80x12 is the size for the top screws - got them at Tractor Supply.
They work perfect!
Thanks All!
Andrew
-
#2 Re: Qlink XF200 SuperMoto Carb ??????'s03-14-2011, 10:38 PM
Andrew,
I don't know if I will the needle to the fourth notch because the Q is running so good. I tried changing the pilot jet to a larger size but didn't gain any power on my dino runs. My plug's color looks good to me.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#3 Re: Qlink XF200 SuperMoto Carb ??????'s
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
03-15-2011, 12:18 AMThanks Vince, I think it's all under control. Got replacement allen heads screws back in her. The ????'s starting flying when I was putting the plate back in the slide. There is an EXTRA Hole in the bottom. The other two are used for the screws. The plate can go in over the hole, or leaving the hole open. After careful examination in the portgugues manual (Better pics) it looked to be open, so thats how I put it back togather. Another q owner in the supermotojunkie forum confirmed that to be correct. Wheeewwww I feel better. I will let you know this week how she runs......Thanks
Andrew
« Previous Thread | Next Thread » |
Similar Threads
-
NEW Mirrors on my Qlink XF200
By JTC in forum Modifications (Cosmetic and Performance)Replies: 12Last Post: 03-15-2011, 06:50 AM -
2009 Qlink XF200 SuperMoto (Hot Wheels) Video
By JTC in forum Ride, Record, CreateReplies: 7Last Post: 02-04-2011, 04:38 PM -
Mikuni carb numbers for Qingqi/Qlink 200's
By Roger in forum MaintenanceReplies: 14Last Post: 12-27-2010, 08:23 AM -
Qlink XF200 Carb questions
By nimbus in forum Dirt n' Dual-SportReplies: 3Last Post: 04-08-2010, 01:33 AM -
ajs dd125e carb settup single carb chengway and increase speed
By biker paul in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-21-2010, 02:57 PM
The Pillars of Salubrity:...
Yesterday, 12:12 PM in Off Topic Discussions