Results 11 to 15 of 15
|
-
#11 Re: Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston
- Join Date
- Apr 2011
- Location
- Bergen County, NJ
- Posts
- 60
04-12-2011, 08:00 PMYeah thats what I thought Barnone, I keep looking for anything on that 400 you posted in Gardos thread but didn't really find anything of use.
That being said what could be done to this motor to pep it up a little other than a freeflowing exhaust and a rejet. Can there be any gains with a better intake/air filter? Has anyone done any work to the head, cam, ignition in one of these?
I really don't understand all the EPA restrictions with motorcycles. In the US it is not a primary source of transportation plus the fact that it's a tiny single cyliner. Compared to our cars and trucks how much polution can that little sucker spew out? It's funny cause here in NJ you don't have to get your bike inspected anymore. Anything goes, loud pipes, no checking your exhaust gasses if it's within "spec", probably could just run with just a horn and headlight, no signals.
Forgive my ignorance with regards to these motors, this is all new to me, China bikes that is.
-
#12 Re: Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston04-12-2011, 09:05 PM
JK3,
That engine is actually a clone of a Honda engine so nothing unique about it being a China motor. I don't have any EPA restriction on my DF now.
I upped the main jet to a 100 over my DF's stock 88 but according to Gardo you already have a 98 but it might be worth a check to verify that. I put a washer under the needle to richen up the mid range.
But we still have a push rod 229cc engine and there is not a lot of power to be had there.
I tried chasing this one down but no luck.
http://www.alibaba.com/product-gs/42...ne_engine.html
Engine Type498cc oil-cooled ,single cylinder, 4-stroke ,SOHC engine Bore & Stroke 92.8mm * 73.6mmCompression ratio9.2 : 1Fuel SystemCarburetorMaximum Output40.8kw / 7800rpmMaximum Torque39.3N.m / 5500rpm IgnitionDC-CDIStartingElectric & KickGearshift5-speed , international gear shiftFinal Drive520 chainVince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#13 Re: Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston
- Join Date
- Apr 2011
- Location
- Bergen County, NJ
- Posts
- 60
04-12-2011, 10:38 PMThanks Barnone, I appreciate it.
-
#14 Re: Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston
- Join Date
- May 2011
- Location
- california,usa
- Posts
- 28
-
#15 Re: Change your CG250 67mm air cooled engine (167FMM)to 70mm bore,Kit include piston
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline 150 big bore Kit
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 19Last Post: 08-04-2021, 08:24 AM -
Bore kit qingqi 200
By ceron in forum MaintenanceReplies: 6Last Post: 11-29-2010, 11:32 PM -
Suzuki/Qingiqi big bore kit for 125cc?
By k44rll in forum Parts DeskReplies: 29Last Post: 07-02-2010, 01:02 AM -
mikilon 125 sb m 96 ? big bore kit help
By erkfreak in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 05-06-2010, 10:21 AM -
YBR 125 bore kit
By Jmarc in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 03-18-2010, 05:58 PM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions