CCW tha Heist

**Gardo** · 05-03-2012, 01:56 AM

Pulled my heist apart again and will be rebuilding the seat brackets and hardware for a new seat i picked up when i road my Heist to Daytona and back pics to come this weekend

http://www.ccwthariders.com/1/post/2...ek-part-1.html

**hiest562** · 05-07-2012, 03:24 PM

friend drop my bike yesterday and the left forward control was got loose how do i take it apart? i been trying to figure it out yesterday and im still lost on it any help would be great thanks

**Gardo** · 05-07-2012, 04:56 PM

Originally Posted by hiest562

friend drop my bike yesterday and the left forward control was got loose how do i take it apart? i been trying to figure it out yesterday and im still lost on it any help would be great thanks

none too difficult hopefully the center bar isnt bent. There is a cotter pin in the peg rotate it till you see it. Loosen it up and then you can unscrew the peg from the bar

**smokin_joes_cbr** · 05-07-2012, 09:07 PM

Quick picture update, here is the scoot as it sits right now. Handling feels good and its about 10 pounds lighter up front. Still got quite a bit of wiring to do including the headlight, led turn signals and resistors. I should have the tank risers from 233 motorsports this week too.0506121306_01.jpg

**hiest562** · 05-08-2012, 03:29 AM

thanks gardo the bar was bent alittle but i got it straighten out and i got it back to normal now thanks for your help!!

smoking joe your bike looks good what fork are u using?

**smokin_joes_cbr** · 05-08-2012, 05:02 AM

Thanks bro, the forks are actually off of a chinese dirtbike that was collecting dust in my garage, its an apollo orion agb30e. I think fastace makes a comparable fork for about 300 bucks. I had to have a bit of machining done on the triple trees to get it to work. The only thing thats left from the heist front end is the bearings.