Thread: Jialing JH-150GY-3 impressions
Results 131 to 140 of 147
|
-
#131 Re: Jialing JH-150GY-3 impressions
- Join Date
- Jun 2012
- Location
- 天津
- Posts
- 72
04-19-2013, 02:51 AM
-
#132 Re: Jialing JH-150GY-3 impressions04-19-2013, 05:16 PM
... how about exposure to dust and dirt?
SWM RS500R, R1200GS LC
-
#133 Re: Jialing JH-150GY-3 impressions
- Join Date
- Jun 2012
- Location
- 天津
- Posts
- 72
04-19-2013, 10:27 PMyou can't see it too clearly in my photos but the pump has a T-Handle that flips out - so that protects the "Shaft" from getting grime in there. The handle also has a slot that the nozzle snaps into to prevent from getting dirt in there too.
T2MpmOXcRXXXXXXXXX_!!651821568.jpg
-
#134 Re: Jialing JH-150GY-3 impressions
- Join Date
- Jun 2012
- Location
- 天津
- Posts
- 72
04-21-2013, 03:45 AMhere they are a little cheaper: http://item.taobao.com/item.htm?spm=..._u=lueorntc1db
-
#135 Re: Jialing JH-150GY-3 impressions
- Join Date
- Jun 2012
- Location
- 天津
- Posts
- 72
05-07-2013, 02:55 AMwent to clean my air filter (what a pain! who designed this thing?) and I noticed the connector on the exhaust didn't seem to be sealed properly - plus a lot of carbon blown back up on the engine top-end, weird right? I figured I'd re-seal it after I cleaned the filter.
IMG_20130501_113451.jpg
then I discovered this problem (which I'm guessing caused the first). one of the exhaust mount brackets is gone from the frame! seems like it rusted and snapped. but where'd the bolt go too?? Whatever - this probably introduced extra tension on the exhaust joint and caused the blow-out. Now I need a piece of scrap metal to weld back on their and properly mount the exhaust.
IMG_20130501_113507 copy.jpg
also, anyone know the valve spec? I'm about 400km overdue for an adjustment and the bike definitely needs it.
-
#136 Re: Jialing JH-150GY-3 impressions
-
#137 Re: Jialing JH-150GY-3 impressions
-
#138 Re: Jialing JH-150GY-3 impressionsJH-150GY-3
-
#139 Re: Jialing JH-150GY-3 impressions
- Join Date
- May 2013
- Location
- ARGENTINA
- Posts
- 8
05-30-2013, 03:21 PMHi!!
This is my china moto
JIALING 150 GY3
Guerrero GXL 150 ARGENTINA!
Saludos desde Argentina!!!
Guerrero GXL 150.jpgGUERRERO GXL 150-2.jpgGXL 150.1.JPGGXL 150. 3.JPG
-
#140 Re: Jialing JH-150GY-3 impressions
- Join Date
- May 2013
- Location
- ARGENTINA
- Posts
- 8
« Previous Thread | Next Thread » |
Similar Threads
-
The first two Jialing Jh600(B) are now in Europe!!!!!
By Bart Sanders in forum Dirt n' Dual-SportReplies: 25Last Post: 10-21-2012, 10:39 PM -
Jialing Parts
By oskrfh in forum North AmericaReplies: 1Last Post: 12-01-2011, 02:20 AM -
[China-Tibet]: Four days, two-up on a Jjialing 150GY-2
By CrazyCarl in forum Ride Reports and MeetingsReplies: 6Last Post: 05-11-2011, 03:53 PM -
Jialing Sales Way Down
By Lao Jia Hou in forum Manufacturers and ImportersReplies: 5Last Post: 03-21-2011, 08:06 AM -
More Power from Jialing 250
By zimanimal in forum Modifications (Cosmetic and Performance)Replies: 6Last Post: 09-29-2009, 12:47 AM
Tags for this Thread |
Prime Сasual Dating - Real-life...
Today, 08:19 AM in Off Topic Discussions