Thread: Qianjiang Motor
Results 1 to 10 of 275
|
Threaded View
-
#34 Re: Qianjiang Motor07-21-2017, 11:39 AM
924100323.jpg
I use Motul 5100 10w-40 runs decent, change every 3000km, i have reached 20,000km for a while... you need to change the factory oil quick, 1st change like 500km, it's crap they put it in.
but be really careful when replace the oil filter, contra to common sense, the hole must facing out... if you mix up oil flow direction, the result could be blown oil filter cap and possible more damage. so a pre warnning
I bough a few spare factory oil filter, both front and rear have rubber seal attached to.
Tag on package it is
-----------------
Name BJ250-15
part no. QJ172MM-A
-----------------
1838527697.jpg
this side must facing out!!!
837952677.jpg
300820192.jpg
after tape measuring, here is rough spec
--Length 39mm, 44mm (both side rubber seal thickness include)
--Diameter 45mm
TDLast edited by td_ref; 07-21-2017 at 02:40 PM. Reason: correct number
同志仍需努力
« Previous Thread | Next Thread » |
Similar Threads
-
QianJiang 150-19A
By lobotomous in forum StreetReplies: 21Last Post: 09-01-2012, 07:16 AM -
CBF125 China motor???
By jonnyenglish in forum StreetReplies: 5Last Post: 08-01-2010, 04:46 PM -
Info on what motor it has
By kens in forum MaintenanceReplies: 6Last Post: 10-04-2009, 05:25 PM -
Modified CJ 750 24 hp SV motor
By Shanghaifingers in forum SidecarsReplies: 1Last Post: 02-20-2009, 04:02 AM -
hi fellow motor bikers
By Lago888 in forum Welcome to MCM!Replies: 5Last Post: 04-25-2008, 08:53 AM
Tags for this Thread |
A Working VPN Solution?
04-11-2024, 03:10 AM in Off Topic Discussions