Results 1 to 9 of 9
|
-
#1 Pulse adrenaline Handlebar protection / guards12-24-2011, 06:54 AM
Hi guys,
Ive been looking at getting some bar guards,
the wrap around ones that will offer good brake/ clutch lever protection,
Do any of you guys have a favorite brand or model or will any do?
Also, having never dealt with them before, where exactly do you measure them to fit?
Many thanks in advance for any replies.
James
-
#2 Re: Pulse adrenaline Handlebar protection / guards01-06-2012, 03:40 PM
Not much in the way of replies, but I guess there aren't many people who have done this mod?
http://www.ebay.co.uk/itm/2307155397...#ht_2336wt_689
Ive ordered these, and will post pictures and a brief description of fitting for future reference if anyone else asks the question.
-
#3 Re: Pulse adrenaline Handlebar protection / guards
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
01-09-2012, 06:18 AMThose look like Acerbis knockoffs and should do a good job of not only protecting your hands from brush and cold, but also protecting your levers in bike drops and getoffs. I can't imagine riding offroad without these.
Do let us know how they have a "made in China" label and how they work out for you!
Cheers
jkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#4 Re: Pulse adrenaline Handlebar protection / guards
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
01-10-2012, 07:42 AMG'Day,
Installed a set of BARKBUSTERS on my Ducati Multistrada today, high quality parts.
http://www.barkbusters.net (stickers can be easily peeled off).
-
#5 Re: Pulse adrenaline Handlebar protection / guards
- Join Date
- Dec 2009
- Location
- mostly Shanghai, sometimes northern California
- Posts
- 3,222
01-10-2012, 09:13 AMBarkbusters are the bee's knees, the pride of Oz. They'll be great on the 'strada. I consulted with Matthew Philpott about having a set sent up here, but the price was more than I could bear. Close to US$200 by the time they'd have reached me.
The Acerbis knockoffs have been great so far. Lord knows I've dropped the bike quite a few times!
When do we get to see this new steed, TB? You going to join us for drinks tonight at Jackie's?
cheersjkp
Shanghai
2010 JH600 "Merkin Muffley" (in Shanghai)
2000 KLR650 "Feezer Ablanalp" (in California)
-
#6 Re: Pulse adrenaline Handlebar protection / guards
- Join Date
- Nov 2011
- Location
- Down the road in China...
- Posts
- 1,134
01-10-2012, 09:50 AMG'Day,
130$ Singapore for the Barkbusters and mate brought them up last Saturday from Singapore with some other Duc parts.
Pass on the drinks, major hangover from last night and staff dinner coming up later this week.
Duc pic attached....... still need to remove the frame stickers, CNY break will be all bike building and modifying.......
Duc1.jpg1photo.JPG
-
#7 Re: Pulse adrenaline Handlebar protection / guards01-13-2012, 07:48 PM
hey TB those guards look awesome!
the price is a little steep for me right now though, when i get my drz400 ill treat myself to some i think ;-)
-
#8 Re: Pulse adrenaline Handlebar protection / guards01-13-2012, 08:10 PM
right, so, ive fitted the guards.....
fairly straight forwards, though next time ill pay more attention to the diameter of the bar end plugs
here are some pics showing a couple of the steps along the way,
first the fixings included in the kit, the smaller plugs were a little on the small side but are holding well after i opened the centre out a little to give more adjustment,
and the larger plugs wouldnt fit in the end of the bar,
Untitled by offtheclockuk, on Flickr
so, take a sharp blade and cut the rubber around the end of the grip, exposing the end of the throttle tube.
Untitled by offtheclockuk, on Flickr
then grab yourself a saw and chop the end off the throttle tube, dont be shy now!
Untitled by offtheclockuk, on Flickr
next, throw the inner mounting clamps onto the bar, the guard is loosely attached already to give an idea of where you need to mount the clamp.
Untitled by offtheclockuk, on Flickr
then loosely bolt the end plug to the guard and insert it into the bar, the picture shows it tightened already.
Untitled by offtheclockuk, on Flickr
then tidy any loose ends and tighten the bolts up, checking for clearance around the brake and clutch levers, adjust as necessary,
next stage is step back and admire your handywork, go on give yourself a high five, you did it!
Untitled by offtheclockuk, on Flickr
so on reflection i should have measured the internal diameter of the bar end before ordering, but for £34 inc postage its not a bad investment as they do keep a bit of the wind and rain off your gloves,
next step will be a 150cc kit, so i guess ill post some pictures of that too.
thanks, James
-
#9 Re: Pulse adrenaline Handlebar protection / guards02-04-2012, 05:55 PM
My friend has acebirds on his huskavarna and they seem really good, he paid about 50-60 from the local ktm dealer but they are very good :)
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline 125
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 10-09-2012, 11:32 PM -
Pulse Adrenaline
By jonesyboy in forum Welcome to MCM!Replies: 1Last Post: 10-15-2011, 05:59 PM -
Pulse Adrenaline
By Rodders in forum Dirt n' Dual-SportReplies: 24Last Post: 02-01-2011, 04:47 PM -
Nearly Done; Pulse Adrenaline
By Sprocket in forum Dirt n' Dual-SportReplies: 14Last Post: 10-19-2010, 11:22 AM -
Crash Guards ?
By Sprocket in forum Modifications (Cosmetic and Performance)Replies: 4Last Post: 01-22-2010, 08:49 AM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions