Thread: PZ30 jets anyone?
Results 1 to 10 of 12
|
-
#1 PZ30 jets anyone?
- Join Date
- Jan 2012
- Location
- Jersey shore
- Posts
- 16
02-22-2012, 01:49 AMi cant find a jet kit for the pz30 carb on my tmec 200. the jets are odd any ideas where i can find them?
TMEC 200
-
#2 Re: PZ30 jets anyone?02-22-2012, 08:33 AM
It's a Keihin clone one of these fits if u measures it.
http://www.jetsrus.com/a_jets_by_car..._selection.htm
-
#3 Re: PZ30 jets anyone?
- Join Date
- Jan 2012
- Location
- Jersey shore
- Posts
- 16
02-22-2012, 02:57 PMthanks i will check it out
TMEC 200
-
#4 Re: PZ30 jets anyone?02-23-2012, 02:06 PM
Get the n424-36 in both 102 and 105 sizes. Throw a washer or two under the needle. The pilot jets are not commonly available. You can have the carb modded to accept a keihin pilot.
-
#5 Re: PZ30 jets anyone?
- Join Date
- Jan 2012
- Location
- Athens, Tn
- Posts
- 4
03-26-2012, 07:36 AMKb96gt which pilot jet matches up? Also what do you mean throw some washers under the needle, i'm not to experienced with carbs but im a big do it yourself fan. I can figure stuff out i just like to read up on everything so their are no surprises.
-
#6 Re: PZ30 jets anyone?
- Join Date
- Sep 2011
- Location
- Sofia, Bulgaria
- Posts
- 262
03-26-2012, 09:10 AMPolini sell aftermarket jets for Keihin, Mikuni and Dellorto:
http://www.poliniusa.com
I've used normal Keihin pilot jet in my PZ30...
-
#7 Re: PZ30 jets anyone?03-26-2012, 01:34 PM
The Heist has a stock pilot jet that didn't match up to any Keihin. I sent my carb off to Tom Weaver. He modified it to fit this... http://jetsrus.com/a_jets_by_carbure...low_26-xxx.htm Stock size is 40 so bump up from there.
The washer under the needle is a trick to raise the needle in the slide. Most needles have a clip that you raise and lower the position, richening and leaning the idle. A washer or two under the needle will raise it up and richen the idle.
Here's the size of the washers needed:
http://jetsrus.com/individual_parts/009_396_su.html
I once did a quick write up of the process let me find it...
http://www.mychinamoto.com/forums/sh...ll=1#post28102
-
#8 Re: PZ30 jets anyone?03-26-2012, 01:41 PM
-
#9 Re: PZ30 jets anyone?
- Join Date
- Jan 2012
- Location
- Athens, Tn
- Posts
- 4
03-27-2012, 01:43 AMHmmm, might have to just bite the bullet and send my carb of to Tom. Was going to try and do it myself to save money, but mainly i have fun doing it. I'll have to get a hold of Tom and see how much he charges, surely its not to much.
-
#10 Re: PZ30 jets anyone?
- Join Date
- Sep 2011
- Location
- Sofia, Bulgaria
- Posts
- 262
« Previous Thread | Next Thread » |
Similar Threads
-
I'm looking for a larger pilot jet(For PZ30 with accel.pump)
By bomorceau in forum Parts DeskReplies: 4Last Post: 06-27-2012, 06:04 PM -
PZ30 TMEC need help
By bubbabu in forum MaintenanceReplies: 5Last Post: 02-22-2012, 07:32 PM -
Changing Jets?
By firefightermatt in forum Modifications (Cosmetic and Performance)Replies: 22Last Post: 03-18-2011, 11:03 AM -
Qlink XF/ XP 200 Needle (Jets) Change (CarbJets)
By JTC in forum Dirt n' Dual-SportReplies: 10Last Post: 02-20-2011, 02:13 AM