Results 11 to 20 of 20
|
-
#11 Re: QingQi (Qlink) QM200GY About the clutch
- Join Date
- Apr 2010
- Posts
- 1
04-28-2010, 07:47 PM
I have a question. My english is not so good, but I'll try to say it right. I have the same problem about the clutch, and I'm wondering can I just pull out that cam or I must pull out everything like ChinaV. Thank you on quick answer :)
-
#12 Re: QingQi (Qlink) QM200GY About the clutch
-
#13 Re: QingQi (Qlink) QM200GY About the clutch
- Join Date
- May 2010
- Posts
- 1
05-04-2010, 01:31 PM
Dear ChinaV, can you give me your opinion about my case, My QM200Gy have aprox 2.300 km, all is ok, generally I'm satisfied with bike. few days ago I noticed problem with changing gear from higher gear (3 or 4) to first gear. Actually is going till second gear but is difficult to put in first one. so, when I start from 4 gear in 3 gear is going almost normal, then I try to put in 2 gear but is not going. It stop let's say in the middle, lamp is not showing nothing (lamp which showing gear) after I release clutch just a half I hear like "click" in engine and then it is in 2 gear and it is shown on lamp. same after, I put in 1 st gear, nothing, like in the middle, release a clutch little bit, again click and it is in 1 st gear. In neutral is going without a problem. Also this is only when I have to stop immediately on traffic light and I stay 3 or 4 gear. If I drive and during driving I dont have this kind of problem. Any information about this?.
my best regards.
-
#14 Re: QingQi (Qlink) QM200GY About the clutch
04-19-2012, 09:15 PM
I think you need to adjust the clutch cable. Adjustment is done at the end of the clutch cable connection to crack case.
-
#15 Re: QingQi (Qlink) QM200GY About the clutch
- Join Date
- Oct 2012
- Location
- Miami, Florida
- Posts
- 24
11-17-2012, 04:53 AM
I just bought a 2008 xf200 with 50k miles on it about a month ago for $400 and it is running pretty good. The bike is leaking oil from the clutch cam. I'm thinking that replacing the #18 Oil Seal will solve the oroblem.
Will the oil seal for a Dr200 fit the q?
I am also wondering if the oil seal and o-ring behind the counter shaft. Sprocket of the Dr200 and the Dr200 are identical.
-
#16 Re: QingQi (Qlink) QM200GY About the clutch
11-17-2012, 09:35 AM
Is very likely that both models have the same oil seal size, but what impressed me in your post is the mileage. Fifty thousand miles, you said?
Ask me nothing - I DO NOT speak english. Really...
-
#17 Re: QingQi (Qlink) QM200GY About the clutch
11-17-2012, 11:38 AM
According to pdf file http://www.atvpart.ru/files/3_1.pdf , that parts had "K157..." which suggest it's like the 125 , DR125 parts might fit.
-
#18 Re: QingQi (Qlink) QM200GY About the clutch
- Join Date
- Oct 2012
- Location
- Miami, Florida
- Posts
- 24
11-17-2012, 11:46 AM
Yes Zorge, 50,000. The bike has very good compression and starts in one or two kicks every time. Granted, it needs a little bit of work but very much worth the $400. The previous owner rode the q everyday which is why I believe the bike still runs good after all those miles.
This is my daily commuter bike.
I'll take pictures and post them here. Might also shoot a video of the bike starting, running and the mileage for people who doubt these Chinese bikes.
-
#19 Re: QingQi (Qlink) QM200GY About the clutch
- Join Date
- Oct 2012
- Location
- Miami, Florida
- Posts
- 24
-
#20 Re: QingQi (Qlink) QM200GY About the clutch
11-17-2012, 01:30 PM
www.mychinamoto.com/forums/showthread.php?642 | Database(s) also tells info, for example: http://zyqc.cc/ProductCategory/Detail/K7510465
« Previous Thread | Next Thread » |
комедии 2024 русские
Today, 07:03 AM in Off Topic Discussions