Results 1 to 3 of 3
|
-
#1 Need help on my QJ Supershadow 250
- Join Date
- Feb 2012
- Location
- South Australia
- Posts
- 2
05-03-2012, 05:44 AMPurchased the 250 at Xmas 2011 and since new after riding for 10/15 minutes as you accelerate it looses power and stalls. I had problems at 193kms after taking to a mechanic he cleaned carbie etc and suggested there was excess oil on air filter. Bike went well until the other day at 427kms. It should not happen to a new bike. Local mechanics are puzzled. Can anyone help?
-
#2 Re: Need help on my QJ Supershadow 25005-03-2012, 09:49 AM
d/l the Yamaha XV250 shop manual for the typical "specs" for DiY if u wants the bike in TOP condition. Yammie enthusiast site are more suitable than here. Most chinese clone here are based on Honda (single & twin) /Suzi (single) which aka "bullet proof" machines .
-
#3 Re: Need help on my QJ Supershadow 250
- Join Date
- Sep 2011
- Location
- Sofia, Bulgaria
- Posts
- 262
05-04-2012, 10:15 AMI would check the following in that order:
1. Tank vent
2. Spark plug and cables
3. New coil
4. New CDI
« Previous Thread | Next Thread » |
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions