Adventure Motorcycle Magazine Subscribe Now

Page 1 of 7 123 ... LastLast
Results 1 to 10 of 69
  1. #1 pulse adrenaline 150cc big bore kit fitted 
    C-Moto Regular offtheclockuk's Avatar
    Join Date
    May 2011
    Location
    manchester UK
    Posts
    59
    hi guys, as you may have seen ive been pestering about the kit,

    i finally ordered one off ebay and with the help of my mate (who happens to be a very good part time bike mechanic) we fitted the kit today,
    the first thing i did was to paint the barrel black so that it didnt stand out so much when it was fitted.

    it only really took around 2 hours to go from rolling the bike in to rolling it back out again, everything went smoothly and there were no problems.

    i rode the bike home afterwards, i cant abuse it yet as it needs to run/bed in again but initial feelings are very good, there is much more torque than i was expecting,

    here are a couple of pictures from the build and a short video i took of it running, apologies for the sound quality, i do not have a proper camera only iphone4.
    http://youtu.be/ssJXEWU21ms


    james


    un painted by offtheclockuk, on Flickr


    painted by offtheclockuk, on Flickr


    starting to strip by offtheclockuk, on Flickr


    old small piston by offtheclockuk, on Flickr



    new big piston by offtheclockuk, on Flickr


    finished and ready to run by offtheclockuk, on Flickr
    Reply With Quote  
     

  2. #2 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Regular offtheclockuk's Avatar
    Join Date
    May 2011
    Location
    manchester UK
    Posts
    59
    a couple of things i forgot to mention, i changed the pilot jet to 17.5 and the main jet to 115.

    also about a week after the kit arrived, fedex sent me a bill for £15, aparently import duty and administration charges, cheeky fuckers (pardon my french)!

    james
    Reply With Quote  
     

  3. #3 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    I'm ordering mine soon, I can't wait to fit it :3

    You should grind off the 147cc mark if you aren't going to declare this to your insurer and/or you are still on a CBT as I'm pretty sure that this invalidates your tax and insurance otherwise. I was looking into breaking in procedures today and a lot of sources say that you should push it a little bit and bring the revs up quite high as the piston rings will seat better.

    Where did you get the pilot jet from?
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  4. #4 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Regular offtheclockuk's Avatar
    Join Date
    May 2011
    Location
    manchester UK
    Posts
    59
    Jet came from eBay, if I can find the link I'll post it here,

    I did think about ditching the markings, may still do if I decide I like the performance
    Reply With Quote  
     

  5. #5 Re: pulse adrenaline 150cc big bore kit fitted 
    Senior C-Moto Guru Kennon's Avatar
    Join Date
    Feb 2011
    Location
    Moscow
    Posts
    799
    should be a minimum of 500 miles to run it in properly excessive revs during this stage with cause it have a increased friction that will make the cylinder wall more scored than if it was looked after during the 500 miles a engine that isnt run in might be 1-2mph quicker but then its life is signifcantly reduced some say up to 10,000miles less in a car engine by not running it in carefully

    Kennon
    Reply With Quote  
     

  6. #6 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Regular offtheclockuk's Avatar
    Join Date
    May 2011
    Location
    manchester UK
    Posts
    59
    I've always broken stuff in gently, the original piston had hardly any marks at all on it, and the cylinder bore was unmarked, 700km of very gentle varied engine speeds, then 4000km of quite hard use, plenty of full throttle and 9000rpm and more!
    Reply With Quote  
     

  7. #7 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    Quote Originally Posted by Kennon View Post
    should be a minimum of 500 miles to run it in properly excessive revs during this stage with cause it have a increased friction that will make the cylinder wall more scored than if it was looked after during the 500 miles a engine that isnt run in might be 1-2mph quicker but then its life is signifcantly reduced some say up to 10,000miles less in a car engine by not running it in carefully

    Kennon
    Ah that makes more sence actually I'd rather an engine to last longer I suppose.
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  8. #8 Re: pulse adrenaline 150cc big bore kit fitted 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Disaster about 62mm mod http://www.motorfans.com.cn/bbs/t_17307341_1.htm
    "barrel" modded locally / Piston from "net" seller. The conclusion in that thread IS something done wrong locally for the barrel
    Reply With Quote  
     

  9. #9 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Regular offtheclockuk's Avatar
    Join Date
    May 2011
    Location
    manchester UK
    Posts
    59
    What?!

    I can't translate, is that the same as my kit?
    Reply With Quote  
     

  10. #10 Re: pulse adrenaline 150cc big bore kit fitted 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    You got the eBay one didn't you? You can see in the pictures that the cam chain tentioner hole is a different shape so you must have a different one.
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

Page 1 of 7 123 ... LastLast

Similar Threads

  1. Pulse Adrenaline 150 big bore Kit
    By superfamous in forum Modifications (Cosmetic and Performance)
    Replies: 19
    Last Post: 08-04-2021, 08:24 AM
  2. Pulse adrenaline big bore help please
    By offtheclockuk in forum Modifications (Cosmetic and Performance)
    Replies: 12
    Last Post: 07-08-2014, 12:31 AM
  3. Pulse Adrenaline 125
    By superfamous in forum Modifications (Cosmetic and Performance)
    Replies: 7
    Last Post: 10-09-2012, 11:32 PM
  4. Pulse Adrenaline
    By jonesyboy in forum Welcome to MCM!
    Replies: 1
    Last Post: 10-15-2011, 05:59 PM
  5. Pulse Adrenaline
    By Rodders in forum Dirt n' Dual-Sport
    Replies: 24
    Last Post: 02-01-2011, 04:47 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •