Results 31 to 40 of 69
|
-
#31 Re: pulse adrenaline 150cc big bore kit fitted11-12-2012, 08:50 PM
hi bud,
not much to add over what spencer2004 said, the low end and midrange torque is up, head flow is restrictive at high rpms, 65-70 mph is about top.
to be fair with the change of sprockets i had done, the top speed is up on standard as the bike was rediculously short geared when i got it, 9000rpm at 55mph,
now i can cruise along at 55 at around 1/2 to 3/4 throttle at about 6000rpm, i dont think im even going to bother trying to recover the last few rpms ive lost at the top end because of the bigger piston on the standard rod, probably not good for the engine to keep revving high anyway.
well worth the conversion if youre a big lad like me and act like an air brake perched on top of the bike, the grunt is welcome, great not fishing for lower gears on hills and into the wind
james
-
#32 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Sep 2012
- Location
- worcester
- Posts
- 9
01-21-2013, 04:25 AMit there a bigger kit for these bikes than the 150cc kit ? can you just get the 150 head kit and just bore that head even bigger ? or can i just get my 125 head bored bigger ? whats best to do i want kit bigger than a 150 and if there is one what do i have to do to the engine for it to cope i e new cam shaft and con rod much help need thanks iv done a thred be nice to answer questions on that rathere than this thred thanks thred name is 125 motorcross engine performance or some thing long them lines
-
#33 Re: pulse adrenaline 150cc big bore kit fitted01-21-2013, 04:47 AM
I do not know Conner I have a 200cc so the topic never interested me that much, I just noticed that one member on the forum bored his out his 125 to 150cc.
You seemed to have found the thread…
-
#34 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
01-21-2013, 10:45 AMHere is a 188cc big bore kit http://item.taobao.com/item.htm?spm=...id=14901325189
The cylinder head is only designed for a 125cc cylinder so it will create a bottleneck which will limit the maximum revs so in other words the top end will be terrible. The seller reccommends a different camshaft to increace air flow but he only sells a cam for the EN125 engines whereas yours is a GS125, the en cam looks like it will fit but I don't know how well it will perform. A cylinder head with bigger valves will also help with that problem but that is kind of an untouched subject on this forum.Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#35 Re: pulse adrenaline 150cc big bore kit fitted01-21-2013, 11:21 AM
Last edited by humanbeing; 08-02-2014 at 09:10 PM.
-
#36 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Portugal
- Posts
- 36
01-21-2013, 07:41 PMhi what the expected power with that 150cc big bore?
-
#37 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Sep 2012
- Location
- worcester
- Posts
- 9
01-22-2013, 02:59 PMyes thanks mate so that 188cc bore where can i get a camshaft and con rod to fit ? and that 188cc bore has he just bored out his standard 125 head ? i do mechanics at college you see and i can get all engine work and stuff done for free ie boreing skim head polish and porting exc just wondering if i can just get my standard 125 head bored bigger than a 150cc then ?
-
#38 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
01-22-2013, 03:09 PMIt would probably be less hassle to just buy the whole kit, my 150cc kit cost about £70 - £80 delivered. If you bore it out your self you would still need the bigger piston, piston rings and gaskets to go with it which you would have to get from china anyway.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#39 Re: pulse adrenaline 150cc big bore kit fitted08-12-2013, 07:26 PM
Hi nice thread,im looking to buy a 150cc big bore kit for my Superbyke RMR 125 and i've found this one on Ebay 130949704487 eBay item number would this fit my bike and if so what type of piston will it need the seller has flat top pistons and raised?
-
#40 Re: pulse adrenaline 150cc big bore kit fitted
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
08-12-2013, 07:37 PMYes that one will fit your bike, you need to ask for a flat piston.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline 150 big bore Kit
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 19Last Post: 08-04-2021, 08:24 AM -
Pulse adrenaline big bore help please
By offtheclockuk in forum Modifications (Cosmetic and Performance)Replies: 12Last Post: 07-08-2014, 12:31 AM -
Pulse Adrenaline 125
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 10-09-2012, 11:32 PM -
Pulse Adrenaline
By jonesyboy in forum Welcome to MCM!Replies: 1Last Post: 10-15-2011, 05:59 PM -
Pulse Adrenaline
By Rodders in forum Dirt n' Dual-SportReplies: 24Last Post: 02-01-2011, 04:47 PM
Tags for this Thread |
The Pillars of Salubrity:...
05-12-2024, 12:12 PM in Off Topic Discussions