Results 1 to 5 of 5
|
-
#1 Fault with 200cc Kinlon supermotaro
- Join Date
- May 2012
- Location
- australia
- Posts
- 3
05-08-2012, 02:47 AMCan anyone help with the problem I have with my bike. It idles well but will not rev up at all but this is a intermitted fault. sometimes you start the bike and will will run well and then it will just go to a idle and will not rev up. carburator has been cleaned, new battery installed, new spark plug installed? please help.
If anyone has a electrical diagrame for the bike that would help.
-
#2 Re: Fault with 200cc Kinlon supermotaro05-08-2012, 03:08 AM
Valve clearance within limit? CDI ok ? Chinese Honda clone are ALMOST wired in Honda colour.
The CDI:
http://translate.google.com/translat...asp%3Fpid%3D17
-
#3 Re: Fault with 200cc Kinlon supermotaro
- Join Date
- May 2012
- Location
- australia
- Posts
- 3
05-08-2012, 03:26 AMCarnt be the valve clearence as it runs well sometimes and doesnt miss a beat. i dont know how to check CDI unit. its almost like there is some sort of control unit that will not let the bike rev up past idle.
-
#4 Re: Fault with 200cc Kinlon supermotaro05-08-2012, 05:16 AM
Honda shop manual (Although it's for 125 ) will give u ideas what to check http://www.filestube.com/d7fdcbfa5685d20103e9/go.html
-
The not so common ??? http://www.motorfans.com.cn/bbs/view...originator=yes
-
#5 Re: Fault with 200cc Kinlon supermotaro
- Join Date
- May 2012
- Location
- australia
- Posts
- 3
05-08-2012, 09:32 AMThank you very much for that, I will try and trace the wiring and check the eletrical components out. Thanks for you quick response to my troubles.
« Previous Thread | Next Thread » |
Similar Threads
-
exhaust thing for my Kinlon 200cc
By jape in forum Modifications (Cosmetic and Performance)Replies: 11Last Post: 01-09-2011, 03:25 AM -
Kinlon/loncin 200cc valve clearances
By halfcasted in forum MaintenanceReplies: 3Last Post: 08-11-2010, 12:51 PM -
TXM's Electrical fault?
By txm123 in forum MaintenanceReplies: 17Last Post: 06-08-2009, 06:18 PM -
XGJAO 200-8 Cruiser fault list
By herrmannek in forum MaintenanceReplies: 0Last Post: 01-18-2009, 01:15 PM -
Fault finding flow chart for charging system
By Brice in forum MaintenanceReplies: 3Last Post: 05-10-2008, 01:38 AM
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions