Results 1 to 3 of 3
|
-
#1 Dong Fang DF250RTC Carburetor Re-Jetting05-26-2012, 01:37 PM
I have a 250rtc that I have been riding for about a month. They are geared very low, and upon the recommendation of other riders, I ordered a 35-tooth rear sprocket to get it about where it should be. I should have it installed in a couple of weeks. Next I want to re-jet the carburetor. It is a Walbro PZ26. Does anyone know what the best size jets would be to use? I thought I had seen somewhere that a 110 main jet would be right, but I can't seem to find it again.
-
#2 Re: Dong Fang DF250RTC Carburetor Re-Jetting
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
05-26-2012, 09:31 PMOpen up your carb and see what size your main jet is currently and measure the diamater of the thead so you can figure out which jet you will need. Start with an increase of 0.05mm (e.g. a 100 to 105), do a plug chop test and see how that goes.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#3 Re: Dong Fang DF250RTC Carburetor Re-Jetting
« Previous Thread | Next Thread » |
Similar Threads
-
Dong Fang DF 250 RTB Bobber Information
By barnone in forum StreetReplies: 6335Last Post: 09-21-2023, 06:05 AM -
i need a owners manual for a D250RTC dong fang
By jaydre727 in forum Parts DeskReplies: 12Last Post: 03-07-2018, 06:04 AM -
DONG FANG 250 PARTS LIST
By SR.MAILMAN in forum Parts DeskReplies: 5Last Post: 12-18-2014, 07:15 PM -
BIG BORE KIT FOR DONG FANG 250 BOBBER ?
By SR.MAILMAN in forum StreetReplies: 22Last Post: 09-30-2013, 03:24 PM -
DONG FANG MC_D250RTC.......headlight issues
By jaydre727 in forum Welcome to MCM!Replies: 6Last Post: 07-17-2012, 08:43 AM
Tags for this Thread |
комедии 2024 русские
04-29-2024, 07:03 AM in Off Topic Discussions