Results 1 to 10 of 13
|
Hybrid View
-
#1 TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 04:07 AM
Hello everyone
I have a Yamaha TZM 150 CC with single CYL 2 stroke engine
I want to do some hardcore modification on it
my plane for the modification is
1st step Replacing the cylinder component
Re-Ground the CYL
Forged/custom Piston
Forged/custom CON ROD
Forged/custom CRANK
2nd replacing the carburettor with an electronic fuel injection kit, made specially for the 2 stroke bike, My carburettor ID is kind of small the inner die is 28/mm
I will be replacing it with a bigger throttle bode size 34mm
this kit can be supplied with 1 or 2 injector, but the company support told me that for my engine RPM one injector is ok (my RPM RED LINE start on 10K)2T_EFI_Kit_mid.jpg
3rd install cold air intake with K&N sport filter
4th upgrade is the exhaust system, since my bike sound is really damn high, so i will be installing a branded silencer from FMF, and will try to do a custom silencer for the whole exhaust pipe - like this one . ( the pipe will be wrapped with silicone sheets and rubber/truck inner tube )
exhaust.jpg
That is it for now
So guys, and suggestion or idea will be much appreciated
Do you guys now where I can re-ground(re-bore) my Cylinder !!!
Regards
HanyLast edited by Hany_elkomy; 07-10-2012 at 05:36 AM.
-
#2 Re: TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 04:50 AM
hey hany thats anb awesome plan you have there
i suggest you have a look at this thread
http://www.kiwibiker.co.nz/forums/sh...s-engine-tuner
some of the guys on there are ex 500 gp mechanics and some are even engine designers
do you mean re-bore the cylinder? as in make it a larger diameter?
-
#3 Re: TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 05:04 AM
Thank you Zhu for your replay and advice, yes i mean Re-bore the Cylinder, coz i think it might not be soft from inside, so probably this will cause leaking and it might be one of the reason that my bike is super noise
BTW while i was googling about this i found one of the Chinese forum show the progress of the re-boring for the same bike, but there was not info about the location where this progress has been done
-
#4 Re: TZM 150CC/2 stroke - plane of hardcore modification
-
#5 Re: TZM 150CC/2 stroke - plane of hardcore modification
-
#6 Re: TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 07:33 AM
the photo shows a company in wuhan which is a specialist cylinder boring company
and the phone number should put you in touch with them
looks like they did a pretty nice job of that cylinder as it obviously had a fair bit of damage
good luck with your project hany and keep us updated
-
#7 Re: TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 08:46 AM
This guy from Guangdong also knows these thingy http://www.motorfans.com.cn/bbs/view...e=1&highlight=
This model was popular in Thailand, if can't find the suitable parts in mainland China, try ur luck from there.Last edited by humanbeing; 07-10-2012 at 10:55 AM.
-
#8 Re: TZM 150CC/2 stroke - plane of hardcore modification07-10-2012, 09:07 AM
Zhu,Thanks again for your help
Humanbeing, Thanks for the link
« Previous Thread | Next Thread » |
Similar Threads
-
Air filter and battery modification.
By Valts in forum Modifications (Cosmetic and Performance)Replies: 8Last Post: 09-09-2012, 12:39 PM -
Coming soon! DPRK 5-stroke
By Lao Jia Hou in forum Manufacturers and ImportersReplies: 4Last Post: 10-04-2011, 01:15 AM -
$10.00 Qlink XF 200 SM Rubber foot peg modification
By Cab4less in forum Modifications (Cosmetic and Performance)Replies: 13Last Post: 03-19-2011, 02:47 AM -
Traveling by Plane with a helmet
By CantDecide in forum Welcome to MCM!Replies: 30Last Post: 03-09-2011, 03:45 PM -
Terrafugia Transition Car - Plane
By bikerdoc in forum Off Topic DiscussionsReplies: 6Last Post: 07-13-2010, 07:16 AM
Prime Сasual Dating - Real-life...
04-27-2024, 08:19 AM in Off Topic Discussions