Results 1 to 10 of 11
|
Threaded View
-
#1 Pioneer (Qingqi) XF200 Starting Problem08-02-2012, 10:25 PM
Hello.
I have an intermittant starting problem with my Pioneer (Qingqi) 2006 XF200.
The starting mechanism jams occasionally. It can sometimes be freed by putting the bike in gear and pushing backwards but this is not the ideal sulution.
Sometimes the starter motor spins freely with no engine contact.
I believe this model has a starter clutch and it is recommended in the basic instruction manual that you pull the clutch lever in when starting the bike. Could the problem be caused by a worn main clutch causing the starting clutch to work incorrectly? My main cutch appears to be OK.
The problem stops happening for a while when I tighten the clutch cable. Any ideas?Last edited by jimwelsh; 08-02-2012 at 10:26 PM. Reason: Typo
Regards
Jim
« Previous Thread | Next Thread » |
Similar Threads
-
Starting Problem Pioneer XF200-2V
By jimwelsh in forum MaintenanceReplies: 0Last Post: 02-25-2012, 03:09 AM -
starting problem
By 1callum in forum MaintenanceReplies: 0Last Post: 11-17-2011, 08:23 PM -
RMR 125 starting problem.......
By s91s91 in forum MaintenanceReplies: 5Last Post: 09-29-2011, 10:49 PM -
My Qingqi QM200GY not starting
By tebete in forum MaintenanceReplies: 2Last Post: 08-29-2011, 07:37 AM -
Chain and Sprocket Set Pioneer XF200-2V
By jimwelsh in forum Parts DeskReplies: 9Last Post: 09-22-2010, 12:02 AM
Tags for this Thread |
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions