Results 1 to 4 of 4
|
-
#1 K157FMI (LexMoto Lowride) intake manifold
10-04-2012, 10:24 PM
Hi all, been having some issues with my bike, which ive now traced to a hole which has appeared on the intake manifold, over the space of 2 days it has gone from a hole to a gaping crack.
The bikes less then 2 weeks old, and under warranty so ill be taking it to the dealers to get rectified, but there going to be putting a replacement manifold of the same type on it, which is this one:
125103003.jpg
Does anybody know a good alternative manifold that will fit?
Thanks
-
#2 Re: K157FMI (LexMoto Lowride) intake manifold
10-05-2012, 02:32 AM
It's for Keihin PZ26 alike slide carb. Most Suzi is using Mikuni CV carb.
Generic: http://item.taobao.com/item.htm?id=17164827552 | Genuine Qingqi: http://item.taobao.com/item.htm?id=9159071932Last edited by humanbeing; 10-05-2012 at 03:32 AM.
-
#3 Re: K157FMI (LexMoto Lowride) intake manifold
10-07-2012, 12:26 PM
This one looks perfect http://item.taobao.com/item.htm?id=17164827552 if only it had the sai valve on it :(
Is the SAI essential or can it be left of?
-
#4 Re: K157FMI (LexMoto Lowride) intake manifold
- Join Date
- Apr 2014
- Location
- Slovakia, Šaľa
- Posts
- 29
03-05-2015, 08:03 AM
you can plumb it. its not necessary, its just for euro emission, second thing is crank breather, that should be kept, to keep your oil cleaner.
« Previous Thread | Next Thread » |
Similar Threads
-
LexMoto Lowride (K157FMI Engine) - Planned mods, info & parts help
By Dave-DR in forum Modifications (Cosmetic and Performance)Replies: 3Last Post: 10-03-2012, 09:43 AM -
Ram air intake: can it be done?
By spencer2004 in forum Modifications (Cosmetic and Performance)Replies: 5Last Post: 05-30-2012, 08:29 AM -
Looking for 17 tooth sprocket for K157FMI
By spencer2004 in forum Parts DeskReplies: 4Last Post: 01-29-2012, 04:45 PM -
Jincheng JC50 intake valve
By WeBeGone in forum Parts DeskReplies: 2Last Post: 10-15-2011, 11:28 PM -
Aftermarket intake Genesis GXT200BA power increase
By masterodisaster in forum StreetReplies: 1Last Post: 03-28-2011, 07:00 PM