Adventure Motorcycle Magazine Subscribe Now

Results 1 to 6 of 6
  1. #1 Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Portsmouth
    Posts
    27
    Hi Guys,

    My speedo lights seem very dim and i suspect that the left side bulb has blown, does anyone know if they are easy to replace? and if so how is the best way to replace them?

    I'm not scared of a hammer or screwdriver but i'm no expert...

    Cheers
    WasNotWas
    Reply With Quote  
     

  2. #2 Re: Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    1. Look for screws holding the top of the dashboard on and remove them
    2. Remove top of dashboard
    3. Replace bulb(s)
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  3. #3 Re: Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Portsmouth
    Posts
    27
    Hi spencer2004

    Thanks for the post and i have seen your video's on youtube...

    I followed your advice and got the bulbs out, some are blown so bought some from mychinamoto. took gamble and got 2w since 1.2w is 1 candlepower lol, if it melts the speedo at least i will be warmer.

    thanks for advice
    mike
    Reply With Quote  
     

  4. #4 Re: Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    I aint got no videos on youtube :/

    Nah an extra 0.8 watts isn't going to do any harm, it will make the dash a fair bit more visible.
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  5. #5 Re: Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Portsmouth
    Posts
    27
    Sorry spencer2004

    I was thinking of someone else, no insult intended and thanks for the advice...

    Regards
    Mike
    Reply With Quote  
     

  6. #6 Re: Changing speedo bulbs on Pulse Adrenaline 2012 model 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    No offence taken, I didn't mean to sound offended or anything I just thought for a moment that my old crappy videos were still on youtube D:
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

Similar Threads

  1. Lexmoto XTRS125-24 2012 model - 4 Stroke 125
    By KILLERDOG in forum Modifications (Cosmetic and Performance)
    Replies: 0
    Last Post: 09-25-2012, 11:31 PM
  2. Pulse Adrenaline
    By David-Hewitson in forum Maintenance
    Replies: 1
    Last Post: 05-27-2012, 11:28 AM
  3. Blowing bulbs
    By Griff in forum Maintenance
    Replies: 4
    Last Post: 11-09-2011, 10:14 PM
  4. Pulse Adrenaline
    By Rodders in forum Dirt n' Dual-Sport
    Replies: 24
    Last Post: 02-01-2011, 04:47 PM
  5. Nearly Done; Pulse Adrenaline
    By Sprocket in forum Dirt n' Dual-Sport
    Replies: 14
    Last Post: 10-19-2010, 11:22 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •