Adventure Motorcycle Magazine Subscribe Now

Results 1 to 10 of 18

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1 Venom v200mx help! 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Pennsylvania
    Posts
    12
    Any help? Would love a manual or parts advice need some parts! And advice!image.jpg
    Reply With Quote  
     

  2. #2 Re: Venom v200mx help! 
    Senior C-Moto Guru euphonius's Avatar
    Join Date
    Dec 2009
    Location
    mostly Shanghai, sometimes northern California
    Posts
    3,222
    I'm guessing that's a re-badged Qingqi, like so many others. And I'm guessing that Venom Motors bit the dust a few years ago, like so many others.

    But it looks like a fun bike, and if it is a Qingqi it should not be difficult at all to get parts. Or a Lifan? Or are Lifan and Qingqi the same? Where's MJH when you need him??

    Tell us more about the bike, and about yourself. New acquisition? Know anything about the previous owner? How's she running? Any specific problems?

    cheers!
    jkp
    Shanghai
    2010 JH600 "Merkin Muffley" (in Shanghai)
    2000 KLR650 "Feezer Ablanalp" (in California)
    Reply With Quote  
     

  3. #3 Re: Venom v200mx help! 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Pennsylvania
    Posts
    12
    I traded a Yamaha rt 100 2 stroker for it. It's my only chinese bike. I have an rm 125 that I love and a Honda trxfw 300 atv. I was looking to trade for a 4 stroke and I found this on Craigslist. It's missing the lights and battery box. I would like to get the ignition going. It takes for ever to kick and it has mad compression! Needs a kickstand and the kick starter won't stay folded. But other than that once it's started it runs fine. Just need to find parts and tinker a bit. Thanks for the reply!
    Reply With Quote  
     

  4. #4 Re: Venom v200mx help! 
    Senior C-Moto Guru euphonius's Avatar
    Join Date
    Dec 2009
    Location
    mostly Shanghai, sometimes northern California
    Posts
    3,222
    If you can supply a VIN or an engine number, I'm quite certain someone in this forum can scare up a usable manual, which should lead to a source of parts. I saw in your parallel thread that you may have a partial engine number, suggesting a Zongshen engine? These Venoms seem to have been marketed back in the mid-2000s, so they'll have to have done their import paperwork -- including registration of the engine and frame.

    I hope other members can identify the maker and model from the bike's general appearance.

    cheers!
    jkp
    Shanghai
    2010 JH600 "Merkin Muffley" (in Shanghai)
    2000 KLR650 "Feezer Ablanalp" (in California)
    Reply With Quote  
     

  5. #5 Re: Venom v200mx help! 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Pennsylvania
    Posts
    12
    Thanks e! I will do that. I also sent a pic to qinqi to see if they reply. I asked if they manufactured them. Thanks again!
    Reply With Quote  
     

  6. #6 Re: Venom v200mx help! 
    C-Moto Not-so-Noob
    Join Date
    Nov 2012
    Location
    Pennsylvania
    Posts
    12
    Zs169fml
    25100430
    Reply With Quote  
     

  7. #7 Re: Venom v200mx help! 
    C-Moto Noob
    Join Date
    Dec 2018
    Location
    Pennsylvania
    Posts
    1
    Quote Originally Posted by Jppwvu View Post
    Any help? Would love a manual or parts advice need some parts! And advice!image.jpg
    I have almost the same bike i need to know where i can find a topend rebuild kit for it my motor number is zs169fml if someone could help that would be great
    Reply With Quote  
     

  8. #8 Re: Venom v200mx help! 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Sometimes it's a 63.5 (196) actually
    69 (CB198)https://item.taobao.com/item.htm?id=36744024764
    If brave enough: that item supports the official int'l forwarding service . Shipped overseas as they received it (ie. no manual inspection / won't repack to smaller box: volumetric weight is PiTA in int'l shipping or add more buffer... ) + declaration docs . Via agent is safer bet: will unbox it & take photos to u / Repack to resonable shape... Sticky from chinariders.net < Off-Topic/General Discussion > had many tips about this last option. Just register there & voila
    Last edited by humanbeing; 12-13-2018 at 09:53 AM.
    Reply With Quote  
     

Similar Threads

  1. Venom vmx 200
    By Jppwvu in forum Dirt n' Dual-Sport
    Replies: 0
    Last Post: 11-25-2012, 09:01 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •