Results 111 to 120 of 136
|
-
#111 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)12-07-2010, 03:50 AM
I am waiting on a different can
http://cgi.ebay.com/ebaymotors/ws/eB...m=290497819180
before I change the jets plus I had to order the 125, 127.5, and the 35 slow.Last edited by barnone; 12-10-2010 at 12:12 PM.
Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#112 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
12-08-2010, 02:04 PMKeep us posted on that new can - Are you enjoying the FROST in Florida or didn't you get it?
-
#113 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- USA
- Posts
- 3
12-21-2010, 07:47 PMJTC, can I ask where you found this deal? And is it a "full" system (as it looks in the picture): header, midpipe, muffler?
Thanks, Jroj
-
#114 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)12-21-2010, 09:03 PM
Just a slip on muffler. I put a baffle in it to tone it down.
Dyno run with new can and 127.5 main and 35 pilot.
Blue line is stock
Red line is 127.5 and 35 gained about 1.5 rear wheel Horse Power on this dyno. Much smoother curve without the dips.
Ignore green line because bike was in a different gear.Vince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#115 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
-
#116 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- USA
- Posts
- 3
12-22-2010, 01:56 PMSorry, I didn't realize JTC had several posts with exhaust pics. I was talking about post #110 with the pic of the Pro Circuit Ti-4 exhaust for $250. That's a really good deal if it's a full system, but I don't think there's a link for it.
Thanks for the advice Jape, I did go in and introduce myself (no pics yet though, sorry).
Merry Christmas to all.
Jroj
-
#117 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
12-23-2010, 03:21 AMHeys Guys you must be mistaken mwe with something else. I do NOT yet own a NEW Performance Pipe but I'm definatley working on it. Just ordered my new Jets the other day. I Will however opt for the Full System Like this
Ebay has them for around $230 USD - Hopefully Next Month
-
#118 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
01-31-2011, 03:20 AMok - I'm getting close to ordering up my NEXT mod, based up all the research and feedback you all have provided. Thanks Andrew :)
-
#119 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
02-01-2011, 05:02 PMJust ordered up the Pro Circuit exhaust system above - Will report back on it, when it arrives.
-
#120 Re: Exhaust can for Qingqi QM200GY (aka Qlink, etc)
- Join Date
- Nov 2010
- Location
- Jamestown Pennsylvania
- Posts
- 164
02-06-2011, 03:22 PMOk for those of you who maybe intrested or considering this exhaust system (Pro Circuit T4) total weight of the entire system is 4.9 lbs - I don't know what the stock system weighs yet, but will be sure to weigh it after I get it taken off my bike.
« Previous Thread | Next Thread » |
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions