Thread: Sinnis apache 125 Idle help.
Results 1 to 4 of 4
|
-
#1 Sinnis apache 125 Idle help.
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
01-25-2013, 01:16 PM
Hi there i am stuck and need help with my 125. When i start the bike it revs really high between 3-5000 rpm. When i try and put the choke down the bike slowly cuts out. Looked at the carb and i couldn't actually see the idle screw. Its probably there but i don't wanna start playing with screws that could be important. If someone could help me that want be great and would be much appreciated. By the way my apache is a 58 plate if that makes any difference.
-
- Join Date
- Jan 2013
- Location
- Manchester UK
- Posts
- 29
01-25-2013, 11:16 PM
Might not just be the idle ... the mixture might need adjusting.
-
#3 Re: Sinnis apache 125 Idle help.
01-26-2013, 01:22 AM
Similar to this (SAME carb) : http://www.bikechatforums.com/viewtopic.php?t=264039
-
#4 Re: Sinnis apache 125 Idle help.
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
01-27-2013, 12:34 PM
HI there mate how do you change the mixture on the bike. I found the idle screw and there was not much change. I am going to take the carb off and clean it to see if it makes a change.
« Previous Thread | Next Thread » |
Similar Threads
-
sinnis apache 125 exhaust can (QM125GY)
By belbin369 in forum Modifications (Cosmetic and Performance)Replies: 8Last Post: 08-07-2013, 12:02 AM -
Sinnis Apache Main Jet
By scouse125 in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 10-31-2012, 06:49 PM -
Sinnis Apache
By JamieAldridge1 in forum Modifications (Cosmetic and Performance)Replies: 4Last Post: 09-27-2012, 07:17 AM -
Sinnis Apache 125 /RMR 125 Superbyke lack power above idle
By s91s91 in forum MaintenanceReplies: 0Last Post: 09-17-2011, 05:38 PM -
Sinnis Apache - help needed
By greg79sco in forum MaintenanceReplies: 1Last Post: 09-05-2011, 12:32 AM
Tags for this Thread |