Adventure Motorcycle Magazine Subscribe Now

Results 1 to 9 of 9
  1. #1 superbyke rmz 125 
    C-Moto Noob
    Join Date
    Sep 2012
    Location
    worcester
    Posts
    9
    hi everyone all this bore kits and all that lot im confused where to get it from and what i have to once i got the kit with what extra parts i need to get i have no probs fitting it all.

    i have a superbyke rmz 125 not sure if engine same as suzuki gn ones like the rmr i dont know.

    if people can get links straght to these items it would be great

    a bore kit bigger that a 150cc a 188 or 192 kit or any otheres if there are any and with the kit i know im have to change the cam shaft and conrod so links to one that would fit for the 192 kit and the 188 kit

    also after the 6 speed kit and the best cdi that will give maxamum performance.

    thanks

    pic of my superbyke rmz
    Attached Images
    Reply With Quote  
     

  2. #2 Re: superbyke rmz 125 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Ur engine is K157FMI that made by Qingqi.

    China is on holiday mood , everything will back to normal at the end of February . 400K bikes on this route!!! Most's hometown is < 400 miles, so bike is preferable. http://www.pagx.cn/html/jingfangchua...128/21172.html
    -
    150/ 14mm pin http://item.taobao.com/item.htm?id=13385655225
    -
    http://item.taobao.com/item.htm?id=17729324299
    Programmable: http://item.taobao.com/item.htm?id=18501876897 | 4 curves: http://item.taobao.com/item.htm?id=9153886492
    Last edited by humanbeing; 01-29-2013 at 05:01 AM.
    Reply With Quote  
     

  3. #3 Re: superbyke rmz 125 
    C-Moto Noob
    Join Date
    Sep 2012
    Location
    worcester
    Posts
    9
    is ther a link to a bigger bore ? and link to 6 speed kit and if there a bigger bore also ad links to cam shaft and con rod that will fit thanks and aa crank if you need to change that thanks
    Reply With Quote  
     

  4. #4 Re: superbyke rmz 125 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    Hi and sorry that I didn't explain the whole performance mod thing very well, I'll try again.

    Performance parts for Chinese bikes (or at least bikes with our engine) almost always have to be imported from china, these parts can be found on taobao.com which is the Chinese equivalent of eBay. Most Taobao sellers do not accept payments from foreign credit cards and banks so you need to use a Taobao agent to order the items for you; they will charge you a small fee which is usually a minimum of £5. I use taobaonow as give you 40% off international shipping. Remember that shipping stuff from China to the UK is very expensive; the shipping costs usually exceed the cost of the items.

    Our engine is just about identical to the Suzuki GS125 and GN125 engines and has similarities to the EN125 engine, As such it is best to search for GS125 or GN125 parts rather than searching for parts specific to your model of bike. I have found it best to use Google Chrome to search for stuff on Taobao as it automatically translates the page, when searching for items you will need to translate the search in to Chinese (which can be very hit and miss) and put GS125 on the end.

    Links:
    As far as I know this is the biggest bore kit available (and perhaps the biggest possible too)
    http://item.taobao.com/item.htm?spm=...id=14901325189

    I would imagine that this is the best performance CDI as it has 4 modes
    http://item.taobao.com/item.htm?id=9153886492

    I spent hours looking for a performance camshaft specifically for a GS125 and I could only find this which is for the EN125, it looks the same but I don't know how it will perform
    http://item.taobao.com/item.htm?id=17729324299

    6th gear kit
    http://item.taobao.com/item.htm?spm=...&id=9576478120

    As for the crankshaft I haven't read too much in to it. I think you can just put the crankshaft from the 200cc version of our engine in the 125cc version.
    http://item.taobao.com/item.htm?spm=...id=14610333239
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  5. #5 Re: superbyke rmz 125 
    C-Moto Not-so-Noob Lain's Avatar
    Join Date
    Jan 2013
    Location
    Zhongshan
    Posts
    39
    I always love shopping on TaoBao, the mix of products are sometimes a good laugh....like the crankshaft heat treating system, cleverly disguised as a rice cooker, and the cargo case that doubles as a microwave (which could actually be useful when traveling during the new year) I am still not sure how to use the clothes iron, but its helpful to know where I can get one when I get the new camshaft.

    Capture.JPG
    我曾参观过的所有地方,地球仍然拥有最好的爆米花。
    Reply With Quote  
     

  6. #6 Re: superbyke rmz 125 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Quote Originally Posted by spencer2004 View Post
    I think you can just put the crankshaft from the 200cc version of our engine in the 125cc version...
    The chinese 19? mod is using GZ150(57x58.6) parts (15mm pin) http://item.taobao.com/item.htm?id=7803809607 | con rod: http://item.taobao.com/item.htm?id=16448760479 & 65 or 65.5mm piston /
    NOT enough space for that 200cc w/o serious milling!!! Registry & read the pictures : http://www.motoyes.net/bbs/forum.php...=1&authorid=27
    Last edited by humanbeing; 02-03-2013 at 03:38 AM.
    Reply With Quote  
     

  7. #7 Re: superbyke rmz 125 
    C-Moto Noob
    Join Date
    Sep 2012
    Location
    worcester
    Posts
    9
    thanks for all the information but i think rather than spending all my money on them parts for one engine making it a time bomb haha i just look out for a second hand 250cc engine to fit in the bike. would you lot recormend that ?
    Reply With Quote  
     

  8. #8 Re: superbyke rmz 125 
    C-Moto Guru
    Join Date
    Jan 2012
    Location
    Norwich
    Posts
    408
    Quote Originally Posted by theconister View Post
    thanks for all the information but i think rather than spending all my money on them parts for one engine making it a time bomb haha i just look out for a second hand 250cc engine to fit in the bike. would you lot recormend that ?
    Yes :)
    Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
    Reply With Quote  
     

  9. #9 Re: superbyke rmz 125 
    C-Moto Regular
    Join Date
    Jan 2013
    Location
    Walton on the naze
    Posts
    77
    HI there mate where did you get that exhaust from? Was it a straight fit or did you have to do so modifications to get it on?
    Reply With Quote  
     

Similar Threads

  1. Superbyke RMR 125 - need Help Please :)
    By LukeTastic in forum Street
    Replies: 4
    Last Post: 01-28-2013, 03:45 PM
  2. Superbyke SBS 125 Oil
    By bailey123123 in forum Maintenance
    Replies: 3
    Last Post: 08-01-2012, 06:07 AM
  3. help with a superbyke 125
    By a pearson in forum Maintenance
    Replies: 1
    Last Post: 05-18-2012, 11:58 AM
  4. Superbyke sbs 125
    By Bmonkey in forum Maintenance
    Replies: 1
    Last Post: 03-06-2012, 08:44 PM
  5. Need help with superbyke sbs
    By Bmonkey in forum Maintenance
    Replies: 1
    Last Post: 02-25-2012, 10:22 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •