Thread: End Can for Apache
Results 1 to 10 of 12
|
-
#1 End Can for Apache
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
02-15-2013, 11:45 PMHi there can anyone please help. I really want a new exhaust for my bike and everywhere i read said get the yoshimura of ebay. Before i had the chance to buy the exhaust the item ended and they never relisted the item again. I have ask them if they are going to relist, but nothing back. I was wondering is there any other exhaust that looks nice and will fit on my bike.
Thanks for looking, much appreciated.
-
#2 Re: End Can for Apache
- Join Date
- Sep 2011
- Location
- Sofia, Bulgaria
- Posts
- 262
02-16-2013, 09:08 PMWell, I'm the same boat as you. So, if you find something like the "oval" Yoshimura, I'm all ears.
-
- Join Date
- Jan 2013
- Location
- Manchester UK
- Posts
- 29
02-16-2013, 10:11 PMIm trying to find one for my Lexmoto LSM but no luck so far :(
-
#4 Re: End Can for Apache
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
02-17-2013, 09:00 PMSinnis has a performance exhaust system for their Apaches called the DEP system 3 which should also fit the Pulse Adrenaline. Sinnis are really useless when it comes to publishing information about their proudcts so I don't know much about it and I can not find it for sale anywhere but they would probably sell you one if you contacted them.
http://www.sinnismotorcycles.com/news/?p=194
If you can't get one from them there's always Taobao
http://s.taobao.com/search?q=%BC%AA%...itemz_20130217Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#5 Re: End Can for Apache
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
03-03-2013, 02:19 AMHi there mate thanks for reply is there any others? I found one and they are like £200. I dont have that kinda money to spend on a exhaust. I see lots of people putting aftermarket exhaust on there apaches but when i try to find there exhaust i am never successful.
-
#6 Re: End Can for Apache
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
03-03-2013, 11:11 AMThere are probably dozens of exhausts that will fit the Apache but they aren't labeled as Sinnis Apache exhausts so finding them is a real pain. I know that the exhaust needs a 30mm opening (or at least I think it does) so you need to find performance exhausts for other models of motorcycle or universal ones.
This one has a 31.4 opening so it should fit with a bit of heat proof tape around the end of the down pipe to bridge the gap. This is only a cheap exhaust so there's no telling how loud it will be, plus you will want to switch back to your old one at MOT time.
http://www.ebay.co.uk/itm/110cc-125c...item257b4b6463
See what else you can find here
http://www.ebay.co.uk/sch/i.html?_nk...1&_mPrRngCbx=1Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#7 Re: End Can for Apache
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
03-03-2013, 10:12 PMIf i could find one of those yoshimura ones would i still have to change the exhaust back on the MOT?
-
#8 Re: End Can for Apache
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
03-03-2013, 10:20 PMGood question, I think exhausts have to be marked for road use to pass an MOT and I don't know if Yoshimuras have the mark or not. But as it's a slip on it takes a few minutes to switch over anyway so it's no big deal.
By the way I found some Tai dude selling Yoshimura end cans with the down pipe, you might be able to contact him and ask for the end can on it's own. They aren't genuine Yoshimuras however.Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#9 Re: End Can for Apache
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
03-03-2013, 10:22 PMThanks mate thats brilliant, if you could send a link i would be very grateful.
-
#10 Re: End Can for Apache
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
03-03-2013, 10:30 PMUgh I forget the links every bloody time!
http://www.ebay.co.uk/itm/HONDA-CBR-...item3f22aee8b0Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
« Previous Thread | Next Thread » |
Similar Threads
-
Sinnis apache air filter
By Bradleyrayner in forum MaintenanceReplies: 4Last Post: 02-15-2013, 11:10 PM -
Which Carb to get for a Apache
By Bradleyrayner in forum MaintenanceReplies: 1Last Post: 02-12-2013, 07:05 PM -
Sinnis apache 125 Idle help.
By Bradleyrayner in forum Test TrackReplies: 3Last Post: 01-27-2013, 12:34 PM -
Sinnis Apache Main Jet
By scouse125 in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 10-31-2012, 06:49 PM -
Sinnis Apache
By JamieAldridge1 in forum Modifications (Cosmetic and Performance)Replies: 4Last Post: 09-27-2012, 07:17 AM
Tags for this Thread |
The Pillars of Salubrity:...
Yesterday, 12:12 PM in Off Topic Discussions