Thread: Carb Pilot size advice
Results 11 to 14 of 14
|
-
#11 Re: Carb Pilot size advice03-25-2013, 01:54 PM
It's the legal clone. Keihin had shares in Deni until '11 http://www.dekni.com/company/history4.php ...1994...
http://www.autoinfo.gov.cn/autoinfo_...00081_11_3.pdf ...2011 年 6 月 17 日...
-
#12 Re: Carb Pilot size advice04-03-2013, 10:04 PM
I've played around, I found the magic number for main jet to be 110 for my setup. However the float seal is deteriorating with every change. As for the pilot I've given up. Ordered several jets in a size 50, all of them were smaller than the size 20 :S On all the 50 jets fitted things got worse (as they did look smaller).
So I'm back to the stock 20 size which I have no idea on what really its flow rate is. Instead for the time being I've increased idle revs to deal with the cold as things get warmer I'll have to adjust as I'm only finding it too be stable at 2.5k with choke and 3k without choke in the cold morning starts of around -2c.Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#13 Re: Carb Pilot size advice04-03-2013, 10:18 PM
Also is there a rule of thumb, i know where the idle screw is, but I've got two other screws, one below the float chamber and one on the opposite side of the idle, any idea what either are likely to do as a guess one would have to be the air/fuel mix at idle? As for the other screw I have no idea...
Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#14 Re: Carb Pilot size advice04-04-2013, 07:39 AM
Give us some photos of that carb of yours.
And don't bother with carb, when the weather is still cold. Wait for warmer days.Ask me nothing - I DO NOT speak english. Really...
« Previous Thread | Next Thread » |
Similar Threads
-
what size glass fuse to use
By stacyc72110 in forum Parts DeskReplies: 2Last Post: 01-17-2013, 09:40 PM -
Carb Help Please
By bally71 in forum MaintenanceReplies: 2Last Post: 01-03-2013, 12:37 AM -
I'm looking for a larger pilot jet(For PZ30 with accel.pump)
By bomorceau in forum Parts DeskReplies: 4Last Post: 06-27-2012, 06:04 PM -
ajs dd125e carb settup single carb chengway and increase speed
By biker paul in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-21-2010, 02:57 PM -
Chinese Fighter Pilot Helmet Review
By Supersignet in forum Ride Prep and Making TracksReplies: 4Last Post: 07-12-2008, 03:17 AM