Thread: Performance Cams for 156FMI
Results 11 to 20 of 26
|
-
#11 Re: Performance Cams for 156FMI04-22-2013, 11:38 AM
Don't take my words. Ask the "experts" around you 1st.
Taiwanese is the "guru" modding these Honda based OHC machine by using "chinese" parts. Ask them http://wolfclub.org/ for other opinion.
-
#12 Re: Performance Cams for 156FMI04-22-2013, 12:17 PM
hmmmm, its difficult as in the UK no one seems to know anything and most people have a very negative view of Chinese bikes. The USA seem to have more input as most Honda owners chuck Lifan engines into their bikes as its usually cheaper than rebuilding the original Honda engine, but the biggest problem is in other countries the motorbike laws are not as strict so people tend to get bigger bikes usually up around 250cc, rather than play around or tune 125cc engines compared to the UK.
So all in all information is very difficult to find, as the importers Lexmoto don't know much about their own products, plus this engine is new on their line so no one in the UK has really played around with them as all predecessors were the OHV varients.
If you can have a look again for me on taobao and find anything I would really appreciate it as I'm willing to take a gamble on the cam and big bore kit.
Thanks again!Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#13 Re: Performance Cams for 156FMI04-22-2013, 02:07 PM
This is your engine, and its 150cc sibling, the 200cc does have a longer stroke it shares with a 223cc.
If there is anyone that races CB125 then they would be the resource for performance cams.
Seems that a 150cc build up would be possible on it, but finding performance parts not so easy if the engine is not being raced.
http://www.lifan.com/English/Industr...6-df8eca5fb9eb
This is the only link i found, http://www.webcamshafts.com/index_bl...le_search.html same as the link I posted before.
-
#14 Re: Performance Cams for 156FMI04-22-2013, 02:26 PM
Thanks, the cb125 taobao link human posted does seem to match up in shape to my cam as I managed to get cmpo to send me a picture of the stock ones they store, so that will be ordered as a pure gamble with the hope it fits.
Will order that big bore kit as well and increase it to 156cc from my understanding, are there any bigger kits that increase stroke or even kits bigger than 63.5mm as a 65mm piston would take capacity to 164cc.Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#15 Re: Performance Cams for 156FMI04-22-2013, 02:56 PM
It's 156 ONLY !!! Std 156 barrel (Jialing / Honda Megapro in Indonesia | std 200 barrel is taller) + flat-top piston (std Jialing 156 is convex http://item.taobao.com/item.htm?id=17587839133) that found in std 200. Ask the agent to order the Y230 ( ceramic coated piston + better rings http://www.aqatg.com/index.asp ) kit. The std kit is ~Y170
-
#16 Re: Performance Cams for 156FMI04-22-2013, 03:10 PMLexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#17 Re: Performance Cams for 156FMI
-
#18 Re: Performance Cams for 156FMI04-22-2013, 05:40 PM
Without trying to sound daft, I am going to be using an agent - taobaonow. But I cannot see the uprated option even the translator isn't helping. Have you got a link or what do I advise the agent?
Its my first time doing this sort of thing.
Also what type of piston is required, flat or convex as in translation it all gets lost :SLast edited by arancara; 04-22-2013 at 06:51 PM.
Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
-
#19 Re: Performance Cams for 156FMI04-22-2013, 11:57 PM
-
#20 Re: Performance Cams for 156FMI04-23-2013, 10:53 AM
Thanks human, so I just tell the agent.
I would like this taobao link, however I require the Y230 set he does with FLAT & CERAMIC coated pistons (not convex) and the better piston rings.
I'm a bit confused as with using translate I can't seem to find any mentioning of flat pustons only convex.
Thanks again.Lexmoto XTR-S 156FMI (156cc big bore) - 163FML Cams (+1mm lift) - Foam Filter - Sports Exhaust - 17T Sprocket - 110 Main Jet - PZ30 Carb - Aprillia RS Ignition Coil - Casoli CDI
My Project: http://xtrsproject.wordpress.com/
« Previous Thread | Next Thread » |
Similar Threads
-
DRZ125/XF200 cams interchangeable??
By Boostcrzy in forum Modifications (Cosmetic and Performance)Replies: 30Last Post: 08-03-2014, 04:03 PM -
Performance cams?
By spencer2004 in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 06-22-2012, 10:59 AM -
Giantco City hunter 125 156fmi engine valve clearance
By Chronicz in forum Dirt n' Dual-SportReplies: 1Last Post: 03-28-2012, 11:15 AM -
Giantco City hunter 125 156fmi engine valve clearance
By Chronicz in forum MaintenanceReplies: 2Last Post: 03-08-2012, 05:44 PM -
156FMI upgrade ?
By justas696661 in forum Dirt n' Dual-SportReplies: 0Last Post: 01-30-2011, 12:36 PM
MedSolutions: Finding Solutions to...
Today, 08:28 AM in Off Topic Discussions