Thread: My rmr custom tank graphics
Results 71 to 80 of 99
|
-
#71 Re: My rmr custom tank graphics09-20-2013, 10:03 PM
Let me know how it goes when you test it.Yip ive pushed it a little been using the bike non stop trying to run it in ,i've changed the jetting on the carb and tweaked a few bits here and there just need to change the gearing to see the potential top end wise but i can feel the diffrence in every gear its got a ton more power,infact im very shocked the kit has made as much diffrence as its done tbh i feel more safer on the road with the bike now its got that extra power :)
RMR 150cc unique Supermoto with nice after market parts .Full DEP exhaust system,150cc big bore kit,Molkt 30mm carb with 115 main jet,Performance CDI & Ignition coil,Cone air filter,KOSO DB01+ Digital speedo with RPM Counter and lap time,Alarm + Remote start,Sound system,red breather hose kit,front and back mini carbon indicators,tinted headlight,Fat Bars
-
#72 Re: My rmr custom tank graphics09-21-2013, 12:03 AM
Piston + Rings
(ALL flat) http://item.taobao.com/item.htm?id=12990211223
http://item.taobao.com/item.htm?id=16255707353
---
(Rings) SAME size (1.2/1.2/2.5) as STD 62mm chinese CG150
Reliable brands
Riken http://www.riken.com.cn/ http://item.taobao.com/item.htm?id=3234140003
DY http://www.dongya.cn/ http://item.taobao.com/item.htm?id=22722572123
ATG http://www.aqatg.com/ http://item.taobao.com/item.htm?id=9037805991
-
#73 Re: My rmr custom tank graphics09-21-2013, 05:14 AM
Thanks humanbeing much appreciated :)
RMR 150cc unique Supermoto with nice after market parts .Full DEP exhaust system,150cc big bore kit,Molkt 30mm carb with 115 main jet,Performance CDI & Ignition coil,Cone air filter,KOSO DB01+ Digital speedo with RPM Counter and lap time,Alarm + Remote start,Sound system,red breather hose kit,front and back mini carbon indicators,tinted headlight,Fat Bars
-
#74 Re: My rmr custom tank graphics
- Join Date
- Jul 2013
- Location
- England
- Posts
- 100
09-21-2013, 09:24 AMgoign for a run out today
-
#75 Re: My rmr custom tank graphics11-11-2013, 10:06 PM
image.jpg small update on my rmr I've installed a new front headlight,changed the sproket set up,decided to paint the 150cc big bore cylinder block red with heat resistant paint,fitted a 115 main jet and bigger pilot jet getting 75-80 mph with my kit now it's ran in ..Oh and I fitted some stickers here and there to cover up scratches on the back panels .Next up is a back drum brake to disc brake conversion and custom tail tidy ..still to fit a new seat and finish the vinyl but not had that much time ,also got a new Chinese bike project I'm starting soon
RMR 150cc unique Supermoto with nice after market parts .Full DEP exhaust system,150cc big bore kit,Molkt 30mm carb with 115 main jet,Performance CDI & Ignition coil,Cone air filter,KOSO DB01+ Digital speedo with RPM Counter and lap time,Alarm + Remote start,Sound system,red breather hose kit,front and back mini carbon indicators,tinted headlight,Fat Bars
-
#76 Re: My rmr custom tank graphics
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
11-17-2013, 12:11 AMHi there mate with your stickers do you have to coat them in lacquer or are they fine as they are?
-
#77 Re: My rmr custom tank graphics11-17-2013, 12:33 AM
Hey there,if you mean the Vinyl its just a case of measuring it and cutting it out to fit the pannels and once done just peel back the other end and stick on carefully to make sure you dont get bubbles in it nothing else needed :)
RMR 150cc unique Supermoto with nice after market parts .Full DEP exhaust system,150cc big bore kit,Molkt 30mm carb with 115 main jet,Performance CDI & Ignition coil,Cone air filter,KOSO DB01+ Digital speedo with RPM Counter and lap time,Alarm + Remote start,Sound system,red breather hose kit,front and back mini carbon indicators,tinted headlight,Fat Bars
-
#78 Re: My rmr custom tank graphics
- Join Date
- Jan 2013
- Location
- Walton on the naze
- Posts
- 77
11-17-2013, 02:06 AMOk thanks mate i was not sure if you have to cover with lacquer so that they will survive the bad weather?
Also have you got a link to the race cdi that you have?
Thanks
-
#79 Re: My rmr custom tank graphics11-17-2013, 09:58 AM
No need to cover the vinyl with lacquer it's got a 7 year life span and is suitable for in door and out door use, it's already protected so no worries :) I got my race cdi of eBay at the start of the year by fluke but they no longer do them ,you'd need to import one from China using taobue which is quite easy and shuld only take a few weeks to arrive if you select ems shipping !im sure there's a link to the cdi on this forum you could inbox spencer2004 or humanbeing there good with the links to parts if you can't find it
-
#80 Re: My rmr custom tank graphics
- Join Date
- Feb 2014
- Location
- Feltham
- Posts
- 6
02-23-2014, 02:24 PMNice thred here, exactly what I have been looking for... Graphics, Speedo and potential big bore on my Sinnis Apache.
Cheers Gents.
« Previous Thread | Next Thread » |
Similar Threads
-
Petrol tank help!
By Bradleyrayner in forum Modifications (Cosmetic and Performance)Replies: 0Last Post: 06-13-2013, 12:01 PM -
Pulse adrenaline graphics?
By benlad2012 in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 05-31-2013, 01:00 PM -
How much for mending a gas tank?
By Bucko in forum MaintenanceReplies: 8Last Post: 11-08-2011, 08:16 AM -
Tank bag for Qingi QM200 / QM250
By felix in forum Dirt n' Dual-SportReplies: 4Last Post: 09-10-2011, 11:15 AM -
Broken Stud in Gas Tank
By txm123 in forum MaintenanceReplies: 4Last Post: 07-11-2009, 01:18 PM
Tags for this Thread |