Adventure Motorcycle Magazine Subscribe Now

Page 6 of 6 FirstFirst ... 456
Results 51 to 59 of 59
  1. #51 Re: Bikerdocs' 650TR (CF650-2) review 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    Quote Originally Posted by 650TR Rider View Post
    Just thought. Maybe they have changed the quality of the steel the cable is made from... could be previous quality stretched as lever was pulled thereby not fully engaging the clutch mechanism? Which may have caused metal fatigue and the cable to eventually fail?

    They may have changed the cable composition in later models.
    True, here's hoping!
    Reply With Quote  
     

  2. #52 Re: Bikerdocs' 650TR (CF650-2) review 
    C-Moto Senior
    Join Date
    Jun 2013
    Location
    Hanoi, Vietnam
    Posts
    182
    Quote Originally Posted by bikerdoc View Post
    True, here's hoping!

    I have not suffer of cable complete failure (as I have for throttle and throttle return cables! )
    But lately my clutch did come little stiff and weird and pulling clutch could head few "clicks" from lever but that might just need more grease, it was ok one moment and other really stiff,
    As yesterday i dismantle whole top section of the bike, I decided why not change it now as everything is off anyway.
    After that clutch felt so much better, no more clicks from the lever still might pull it off and grease it just to be sure. my bike has about 8000km
    Reply With Quote  
     

  3. #53 Re: Bikerdocs' 650TR (CF650-2) review 
    Senior C-Moto Guru euphonius's Avatar
    Join Date
    Dec 2009
    Location
    mostly Shanghai, sometimes northern California
    Posts
    3,222
    Given the sad record on these clutch cables, you TR owners may want to try something that's de rigeur among us KLRistas: threading a backup clutch cable through the bike right alongside the one that's in service. When the one snaps, it's a 20-minute job to swap in the backup, assuming you've got the spanners required. I'm thinking about doing this for Merkin Muffley; though I've had no issues with my cable, other Jialing owners have.

    cheers
    euphonius
    jkp
    Shanghai
    2010 JH600 "Merkin Muffley" (in Shanghai)
    2000 KLR650 "Feezer Ablanalp" (in California)
    Reply With Quote  
     

  4. #54 Re: Bikerdocs' 650TR (CF650-2) review 
    C-Moto Senior
    Join Date
    Jun 2013
    Location
    Hanoi, Vietnam
    Posts
    182
    Quote Originally Posted by euphonius View Post
    Given the sad record on these clutch cables, you TR owners may want to try something that's de rigeur among us KLRistas: threading a backup clutch cable through the bike right alongside the one that's in service. When the one snaps, it's a 20-minute job to swap in the backup, assuming you've got the spanners required. I'm thinking about doing this for Merkin Muffley; though I've had no issues with my cable, other Jialing owners have.

    cheers
    euphonius
    Or instead having extra cable next to other people should maybe carry extra inner cable and one of these locks.. 451854.jpg
    Not sure can these last in the clutch use but in throttle use they do work.
    Reply With Quote  
     

  5. #55 Re: Bikerdocs' 650TR (CF650-2) review 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    650tr clutch cable 01.jpg

    The top clutch cable is off my 650TR with the small dust cover removed so as to expose the bare cable, while the lower one is off Prince666's TR. Seems that the cable snapped at the small cylindrical tip on the lower cable.

    650tr clutch cable 02.jpg

    650tr clutch cable 03.jpg

    Fairly clean break. No real fraying of the cable, aside from when I was moving the broken cable end inside the rubber dust cover (removed), catching the broken cable end in the side of the cover once or twice.

    650tr clutch cable 04.jpg

    The length of the lower cable seems to indicate that the snapping occured at the cylinder. Cable may have even pulled out of the cylinder.

    Both cables have been sent back to CFMoto at the companies request. Awaiting a response in due course.
    Reply With Quote  
     

  6. #56 Re: Bikerdocs' 650TR (CF650-2) review 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    Quote Originally Posted by Wald0 View Post
    Or instead having extra cable next to other people should maybe carry extra inner cable and one of these locks..

    451854.jpg

    Not sure can these last in the clutch use but in throttle use they do work.
    Great idea... have to see if these or similar could be located on Taobao
    Reply With Quote  
     

  7. #57 Re: Bikerdocs' 650TR (CF650-2) review 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    A number of upgrades and improvements for the 2014 CF650TR/TK.

    - upgraded dash display incorporating tripometer & clock (to fit to older model requires new wiring loom aside from replacement dash)
    - longer side stand (still no centre stand)
    - continental tyres fitted OEM (gone are the CST tyres)
    - panniers incorporate additional mechanical locking closures on each end
    - engine finished in black (engine may run hotter?)
    - taller screen (additional 40mm taller over OEM, though no 'upward flick' at the top)
    - steel braided brake lines (still no ABS)
    - better fit of the two cubby (storage bin) lids up front (RHS lid closure fits better)
    - addition of powered accessory plug on LHS fairing (interesting placement as any device will need a long cable)

    - ABS added since final quarter 2014 (2015 model)

    Bike-Cluster.jpg
    Last edited by bikerdoc; 05-30-2015 at 03:01 PM.
    Learn the rules like a pro, so you can break them like an artist
    - Pablo Picasso
    Reply With Quote  
     

  8. #58 Re: Bikerdocs' 650TR (CF650-2) review 
    KING of MCM LOL prince666's Avatar
    Join Date
    Apr 2012
    Location
    china (Longkou), Hainan
    Posts
    2,002
    Still no gear indicators which is a shame
    IMO
    Last edited by prince666; 07-06-2014 at 01:15 PM.
    "Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
    Reply With Quote  
     

  9. #59 Re: Bikerdocs' 650TR (CF650-2) review 
    C-Moto Senior DavidC's Avatar
    Join Date
    May 2015
    Location
    Australia, NZ, Malaysia
    Posts
    146
    A gear position indicator would be nice. So does an ambient temperature gauge.
    Ride like the wind but stay safe.
    1976 Suzuki B120
    1984 Honda NH125 Lead
    1986 Honda CX Euro
    1988 Yamaha FZ750
    Reply With Quote  
     

Page 6 of 6 FirstFirst ... 456

Similar Threads

  1. CF650 Service Manual
    By choldy in forum Maintenance
    Replies: 9
    Last Post: 05-12-2021, 09:32 AM
  2. Arrival of the CF Moto 650TR
    By Shanghaifingers in forum Street
    Replies: 72
    Last Post: 05-30-2015, 02:11 PM
  3. Review of the Yamaha YBR 125
    By Lao Jia Hou in forum Street
    Replies: 23
    Last Post: 12-01-2013, 08:47 PM
  4. Galaxy XTR 250 review
    By felix in forum Dirt n' Dual-Sport
    Replies: 84
    Last Post: 09-14-2013, 05:35 PM
  5. Galaxy XTR 250 Review
    By Andy Hird in forum Dirt n' Dual-Sport
    Replies: 40
    Last Post: 12-13-2010, 01:01 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •