Thread: new levers for cfmoto 650nk
Results 1 to 9 of 9
|
Hybrid View
-
#1 new levers for cfmoto 650nk
- Join Date
- Sep 2013
- Location
- adelaide
- Posts
- 36
09-17-2013, 12:06 AMJust another change to my cfmoto 650nk cnc alloy levers needed a bit of work for them to fit but they do work well. have yet to change the mirrors to something better. I did have endure mirrors attached to handle bars but couldn't see any thing behind me
20130913_180954-1.jpg
alex
-
#2 Re: new levers for cfmoto 650nk
- Join Date
- Nov 2013
- Location
- Australia
- Posts
- 1
11-09-2013, 01:05 PMHey Pommie,
Bars and levers look good! What levers did you start off with? Also, does the little 6 position selector switch still work after the modifications?
I think I may have seen your bike on the CFMOTO Aus facey page - looks very cool.
Any info would be greatly appreciated :D
Zach
-
#3 Re: new levers for cfmoto 650nk
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
12-01-2013, 11:17 AMI can confirm that levers from 07-08 Er6 will fit CF650, 09-11 will fit 50%.
Clutch lever is the same on all ER6 models up to 2011, but brake lever is different from 2009 onwards, so it would need some modification to get it to work.
IMG_2315.jpg
-
#4 Re: new levers for cfmoto 650nk
- Join Date
- Sep 2013
- Location
- adelaide
- Posts
- 36
12-22-2013, 12:15 PMhi zach.
the levers are for a 06 er6n and you need to file down some of the lever bolt hole as its to wide (about 2-3mm) also had to drill and tap a new thread and fit a cut down bolt for the brake master to work...as for the 6 postion selector still works without any issues, the clutch is on 2, brake on 6 as i like the brake lever close as i use 2 fingers for brake control.
As for CFMOTO facebook yes its my bike.
alex
-
#5 Re: new levers for cfmoto 650nk
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
12-22-2013, 02:15 PMI must say that if you had to drill and tap brake lever it was not from 06 but 09 :) as that was the year when Kawasaki decided to change the design.Screen Shot 2013-12-22 at 20.53.28 .jpg
here is picture from 06 kawasaki parts diagram and as you can see its identical to CF650
maneta frana Kawasaki ER-6, KLE, ZX6R ZX9R ZX12R copy.jpg
here is the original brake lever from kawasaki Er6 06-08 model.
$(KGrHqV,!hUE6cefp35+BOtuhRd5kw~~60_35.JPG
Here is Er6 2009 onwards brake lever.
-
#6 Re: new levers for cfmoto 650nk
- Join Date
- Sep 2013
- Location
- adelaide
- Posts
- 36
01-10-2014, 12:50 PMok the levers I used are for a er6n 06 onwards, as this is the era cfmoto used for the design of this bike as for my brake lever and adding the bolt its so the brake switch will work. also ive added bar end mirrors as the massive cow horns on the bike are just shocking. not sure about anyone else but I could never see anything behind me due to the bad vibration or should I say badly made mirrors...also a digital clock only for the fact cfmoto forgot to add it into the cluster display (again ebay special)
20140110_225840.jpg20140110_225528.jpg20140110_225543.jpg
-
#7 Re: new levers for cfmoto 650nk
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
01-10-2014, 05:08 PMI was thinking Rizoma reverse classic mirrors.. but they are quite expensive so i think i just go for fake ones. Bike is made in China so why not mirrors too ;)
So you added bolt to hit the clutch master cylinder? that's because from 2006-2008 it was level and clutch lever had dimple to press it, but from 2009 onwards Kawasaki changed design and now clutch master cylinder had a shaft with ball end to mate it to clutch lever. i also seen adds what say kawasaki Er6 clutch lever 2006-2011 but its not correct.
i also did same mod to my lever.
« Previous Thread | Next Thread » |
Similar Threads
-
My blog of a WK650i / CFmoto 650NK
By WirralGhostHunter in forum StreetReplies: 69Last Post: 05-11-2014, 02:40 PM -
New CFMoto 650NK blog x2
By ZMC888 in forum StreetReplies: 90Last Post: 03-29-2014, 06:38 AM -
My Review of the CFMOTO 650NK
By Topmanda in forum StreetReplies: 89Last Post: 09-24-2013, 12:59 PM -
Used CFMoto 650NK for sale in Shanghai
By bikerdoc in forum Bike Market - ClassifiedsReplies: 1Last Post: 08-19-2013, 04:05 PM -
CFMoto 650NK sport bike
By Lao Jia Hou in forum StreetReplies: 103Last Post: 08-28-2012, 04:23 AM