Adventure Motorcycle Magazine Subscribe Now

Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1 any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    so as its titled need some advice i fitted a 150 cc to my apache and now it wont fire up i just cant see why the piston is the right way around rings in the right place just cant get it to fire up just keeps ticking over
    Reply With Quote  
     

  2. #2 Re: any bike mechanics on here need some advice 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,390
    check cables, ignition, fuel, air, spark... check compression... and heaven forbid the kill switch isn't... is it? Hmmm not easy to diagnose via the www... bit like prospective patients looking for a medical opinion or diagnosis over the net... meh... doesn't really work out.
    Reply With Quote  
     

  3. #3 Re: any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    Quote Originally Posted by bikerdoc View Post
    check cables, ignition, fuel, air, spark... check compression... and heaven forbid the kill switch isn't... is it? Hmmm not easy to diagnose via the www... bit like prospective patients looking for a medical opinion or diagnosis over the net... meh... doesn't really work out.
    how would one check if there is spark coming from the spark plug and if fuel is reaching the engine
    Reply With Quote  
     

  4. #4 Re: any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    also been advised to change the jets
    Reply With Quote  
     

  5. #5 Re: any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    and if its compressed properly
    Reply With Quote  
     

  6. #6 Re: any bike mechanics on here need some advice 
    Senior C-Moto Guru zhu's Avatar
    Join Date
    Jun 2011
    Location
    Chengdu
    Posts
    626
    you can check the spark by hold the plug against the engine (with the lead on) and hitting the starter you will see the spark if it is happening. A good healthy spark is blue. Check the fuel by undoing the drain at the bottom of the carb bowl, once you know its got that far it should get the rest of the way to the engine unless the jets are blocked. Are you sure the cam is timed correctly? Does it have compression?
    Reply With Quote  
     

  7. #7 Re: any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    been advised about the timing and how it needs to be lined up and how di i check the compression
    Reply With Quote  
     

  8. #8 Re: any bike mechanics on here need some advice 
    Senior C-Moto Guru zhu's Avatar
    Join Date
    Jun 2011
    Location
    Chengdu
    Posts
    626
    stick your finger over the plug hole and hit the starter , if it pushes your finger away it has compression, you could use a compression gauge , usually you can hire them
    Reply With Quote  
     

  9. #9 Re: any bike mechanics on here need some advice 
    C-Moto Senior
    Join Date
    Jul 2013
    Location
    England
    Posts
    100
    Quote Originally Posted by zhu View Post
    stick your finger over the plug hole and hit the starter , if it pushes your finger away it has compression, you could use a compression gauge , usually you can hire them
    thanks very much will check in few
    Reply With Quote  
     

  10. #10 Re: any bike mechanics on here need some advice 
    Senior C-Moto Guru zhu's Avatar
    Join Date
    Jun 2011
    Location
    Chengdu
    Posts
    626
    no worries. Its also a good idea to use new gas especially if the bike sat for any length of time .The gas gets stale and loses its desire to burn
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Ningbo Mechanics
    By bukowski in forum Maintenance
    Replies: 2
    Last Post: 06-16-2013, 05:08 AM
  2. Rider in Wuhan Seeking Bike Advice
    By MGAlbion in forum Dirt n' Dual-Sport
    Replies: 25
    Last Post: 04-02-2013, 01:18 PM
  3. Replies: 6
    Last Post: 02-20-2012, 01:23 AM
  4. Gy6 motors indepth (electrics and mechanics)
    By Serpentza in forum Maintenance
    Replies: 0
    Last Post: 01-24-2011, 12:34 PM
  5. looking for used bike in QB? any advice or sellers??
    By LDrider in forum Bike Market - Classifieds
    Replies: 5
    Last Post: 06-17-2010, 12:36 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •