How to reset a CFMOTO 650NK/TR Error Code

[ZMC888]

http://www.mychinamoto.com/forums/sh...ror-code/page2

Resetting the error code (series of flashes) or eliminating it on the 650NK/650TR is pretty simple:

1. First WOT (twist throttle wide open [Wide Open Throttle]) with WOT
2. Turn ignition key to ON position.
3. Wait until the red F/F1 light illuminates (be patient as this can take longer than normal).
4. As soon as that appears,
5. Flick the kill switch to the 'NO' ignition position (meaning starter button won't work).
6. Let go of the WOT (throttle).
7. Wait several seconds.
8. Turn ignition key OFF.
9. Flick kill switch back to ignition ON position.

That's it should be reset. To test you got it right, simply turn ignition key back to 'on' and the red F/F1 light should illuminate for the short period as the ECU/ECM goes through it's checks.

Alternatively:
1. First WOT (twist throttle wide open [Wide Open Throttle]) with WOT
2. Turn ignition key to ON position.
3. Wait until the red F/F1 light illuminates (be patient as this can take longer than normal).
4. As soon as that appears,
5. Flick the kill switch to the 'NO' ignition position (meaning starter button won't work).
6. Let go of the WOT (throttle).
7. Wait several seconds.
8. Flick kill switch back to ignition ON position with the ignition key still in the ON position too.

That's it should be reset. The red F/F1 light should illuminate for the short period as the ECU/ECM goes through it's checks as per normal.

Remember:
The error code sequence of flashes should be cleared, except where the cause of the error still exists. So what this is really useful for is to clear the error code for the "service" reminder/due.