Results 1 to 10 of 54
|
Hybrid View
-
#1 The Moriarty MKII, a new project bike for a friend10-03-2013, 12:01 PM
A good mate of mine Pete (actually the bloke who bought the Churchill) is in the market for a new bike... I built another bike... but I wasn't happy with it, it's a great little performer, but he wanted something he could potter about with his bird on the back and also something with power and practicality....
Here's a picture of the bike I originally built for him but wasn't satisfied that it met his requirements (so it went to C-milk who can appreciate its performance orientated stance and handling).
MoriartyMK1.jpg
I happened to be wrenching on this bike at my local bike shop when I saw a GN125 clone stripped down for fixing and it clicked... This is the bike I want to build for Pete, it's bigger, more comfortable, safer and much better for carrying a passenger.
So... enter the piece of shit canvass:
IMG_20131003_2.jpg
It runs.. but that's not important since I'm going to toss the engine anyway...
Why did I choose this rusty piece of crap? Well simply because the frame is salvageable, it has a new tank, the rear tyre is newish... and well because it's the right shape....
The first thing to do was to get rid of all the rust on the frame... this was done using a wire-brush attached to a grinder... I managed to also remove several layers of skin off of my one hand in the process (pain is for the weak).
IMG_20131003_3.jpg
After removing every bit of offending rust (there was a lot)... I had to turn my attention to that awful swingarm:
IMG_20131003_4.jpg
It was completely rusted through... and the swingarm bolt was rusted in place... I had to cut the bugger out with a grinder...
Coming up... things start to look better
- SerpentZA (youtube.com/serpentza)
-
#2 Re: The Moriarty MKII, a new project bike for a friend10-03-2013, 12:17 PM
We continue...
Long story short, a new swingarm, a pair of new rear shocks, and a fresh coat of paint on the rear frame and it ended up like this:
framefixed.jpg
What an improvement... but it took a lot of bloody work :P
I put the rear wheel back on (I'll be taking it off again tomorrow to clean and respray it)
wheel.jpg
Next, I cleaned up a lot of the bits and pieces and then put it all back together... I was knackered and needed to call it a day....
Here's how the bike stands at the end of day one:
dayone1.jpg
Starting to look like something...
dayone2.jpg
Tomorrow the engine gets tossed and a lot of changes will happen to the front end... stay tuned...
- SerpentZA (youtube.com/serpentza)
-
#3 Re: The Moriarty MKII, a new project bike for a friend10-03-2013, 01:10 PM
good choice for a potterer/putterer. Those things have comfort as their main attribute and reliability as a back up. Going to go for the 250 implant?
-
#4 Re: The Moriarty MKII, a new project bike for a friend
-
#5 Re: The Moriarty MKII, a new project bike for a friend
- Join Date
- Apr 2011
- Location
- Taizhou, Zhejiang
- Posts
- 526
10-03-2013, 01:19 PMWhat do you use to get rid of all the rust and aluminum/chrome oxidation? Seems it work really well. My bikes engine is a bit oxidized and I cant find good product to remove it as all the recommended ones are western and hard to get here. Have no idea about the Chinese ones
-
#6 Re: The Moriarty MKII, a new project bike for a friend
-
#7 Re: The Moriarty MKII, a new project bike for a friend10-04-2013, 12:29 PM
Today was pretty productive... I started to work on the front end of the bike...
Firstly I have to explain that the entire front end of this bike is rubbish... here's what's wrong with it:
The forks are rusted pieces of crap, the speedometer and tacho are garbage (and don't work either), the triple tree/clamp is rusted and gnarly and the headlight mounts are rusty too... oh and I didn't mention that the speedo cable and the cable driver are seized and rusted too... basically the whole lot is garbage.... so where do I start?
frontend1.jpg
First thing was to remove the headlight so that I could get at the bolts holding on the speedo cluster... I could also get a closer look at all the rusty goodness that lay beneath...
frontend2.jpg
This bike has seen better days... actually... being bought by me is probably the best thing that has ever happened to this poor neglected turd...
frontend3.jpg
These are absolute garbage, maybe they worked once... way back in antiquity, strange thing is, a pikey at the shop almost tripped over himself with joy when I gave them to him because they "looked more beautiful than the ones on his bike".....
frontend4.jpg
Next I took all the rusty bits and brushed them down to bare steel with the steel brush/grinder combo (be careful with this, not only did I remove a lot of skin yesterday... but today ended up with a lot of wire splinters in my leg hand and even my cheek...)
frontend5.jpg
Here we can see some of my bits after their first coat of paint (more coats and a clearcoat were to follow later)....
Next we take care of those disgusting head bearings....
-
#8 Re: The Moriarty MKII, a new project bike for a friend
- Join Date
- Apr 2011
- Location
- Taizhou, Zhejiang
- Posts
- 526
« Previous Thread | Next Thread » |
Similar Threads
-
New Project Bike, SMC YB150
By ACDNate in forum Dirt n' Dual-SportReplies: 53Last Post: 06-04-2013, 01:37 AM -
New here! Be friend
By fbon2boe in forum Welcome to MCM!Replies: 0Last Post: 04-11-2012, 10:28 AM -
HELP! Need a friend in Chengdu!
By soberpete in forum StreetReplies: 7Last Post: 07-03-2011, 11:27 PM -
Idea's for our next project bike?
By PMI-Asia in forum Manufacturers and ImportersReplies: 5Last Post: 04-04-2011, 12:11 PM -
My New old dirt bike project. Converting a beat up 2002 Hong Du GY 150 for fun...
By Shanghaifingers in forum Dirt n' Dual-SportReplies: 9Last Post: 02-27-2010, 08:56 PM
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions