Results 1 to 1 of 1
|
-
#1 overheating dealt with, now out of timing!!!!!!10-18-2013, 11:41 AM
Hey guys and gals...finally was able to work on the v3. Replaced head gasket with a Honda unit(double layer, metal) and cleaned out the whole cooling sistem... Now I have to set the cam timing. I know is piston at tdc,, but the cam has the following: a whole at one side, two lines at each end and one of those with an "o" above it, and an "A" at the other end. I need to know how it needs to be aligned so I can finally finish with the bike... Anyone have an idea?... Thanks for the help guys!!!!
« Previous Thread | Next Thread » |
Similar Threads
-
help with cfmoto v3 overheating...
By turbo787 in forum ScooterReplies: 5Last Post: 10-15-2013, 12:06 AM -
timing
By WICKED_spider in forum MaintenanceReplies: 0Last Post: 09-20-2010, 09:39 PM -
Hensim 152 FMH Timing
By Seebetech in forum MaintenanceReplies: 4Last Post: 08-10-2009, 04:45 PM -
How to set timing? ZongShen ATV
By wilkins1981 in forum MaintenanceReplies: 5Last Post: 04-03-2009, 01:06 PM -
timing issues
By markgb98 in forum MaintenanceReplies: 4Last Post: 11-19-2008, 01:42 PM