Adventure Motorcycle Magazine Subscribe Now

Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 56
  1. #11 Qingqi QM200 GY-BA Fender modification 
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Ricardo. I really like your fender modification as shown in your website. This involves fitting the guard from a Honda CBF250 (also called a twister in Brazil).

    http://www.caldas.com.br/30anos/motard_engl.htm



    I was thinking of leaving out the original altogether. I've noticed that apart from the riveting to the fork slider guards you've also fitted a thin wire stay at the back. I'll do that as well.

    The problem starts when you pop down to those licensed bandits at the Honda spares shop and find that the price here is 150 euros ( US$190) or (449 BRL). Just for comparison, the perfectly well-made original Qingqi mudguard costs 25 euros (US$32) or (75 BRL).

    I've noticed that you say that yours is from an aftermarket supplier which is bound to be cheaper. Is it this one:

    http://www.artfibras.com.br/loja/

    It might not be, as they have some bits for the 250 Twister, but not the front fender. Can you tell me where you got it from. Thanks.
    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

  2. #12  
    C-Moto Not-so-Noob Ricardo's Avatar
    Join Date
    Feb 2009
    Location
    Goiânia - GO - Brazil
    Posts
    33
    Hi Forchetto, I went today to the same aftermarket parts supplier (Centaurus Moto Peças) where I bought the front fender and took note of the maker's name.

    The company name is MELC, and their web address is : http://www.melc.com.br/default.asp . Just to give you an idea of prices, I paid R$ 30,00 (BRL 30,00) for the fender at Centaurus.

    After getting the fender I sandpaper it (all the surface), then I made a careful measurement of the fender height in relation to the front fork slider, in addition I used two pieces of rubber (folded) and inserted them on both sides between the fender and the fork sliders BEFORE rivetting the parts. This is fundamental to avoid breakage of the parts, and to avoid unwanted vibration of the mounted set. In reality you will be doing a "sandwich" - the plastic parts will be pressing a piece of rubber folded, in order to cushion the pression of the rivet gun.

    Do get a 1 meter long electricity wire (covered with black plastic), and insert it through the small lateral holes you must place at the back end of the fender. The wire will go through the holes, being directed through the inner part of the fender. Good luck!
    Last edited by Ricardo; 02-21-2009 at 07:54 PM.
    Reply With Quote  
     

  3. #13  
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Fantastic. Thank you.
    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

  4. #14  
    C-Moto Not-so-Noob Ricardo's Avatar
    Join Date
    Feb 2009
    Location
    Goiânia - GO - Brazil
    Posts
    33
    Hi Forchetto, have you been lucky in your quest for the front fender of you Qingqi QM200GY-BA Super Motard (using the Twister part)?

    Cheers.
    Ricardo
    Owned:1969 Yamaha YF5 50cc, 1971 Yamaha YDS7 250cc, 1977 Honda ML 125, 1980 Honda CB 400, 1985 Honda XL 125 S, 1986 Kawasaki KLR 600, 1996 Honda CBX 200 Strada, 1998 Honda C-100 Dream, 2001 Honda CBX 250 Twister, 2007 Sundown Hunter 90
    Own:2008 Sundown STX Motard 200cc, 2017 Yamaha XTZ Ténéré 250cc Blueflex
    Reply With Quote  
     

  5. #15  
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Quote Originally Posted by Ricardo View Post
    Hi Forchetto, have you been lucky in your quest for the front fender of you Qingqi QM200GY-BA Super Motard (using the Twister part)?
    Cheers.
    Ricardo
    I found a good condition used one on ebay for a low price ($10). I did try to fix it like yours but decided to junk the original "Mad Max" type of guard that I've never liked, and fix the CBF's to the originals mounting points.
    I had to separate the guard from the bottom yoke to ensure some space between it and the front frame tube, so I used 4x 25 mm long silentblock rubber mountings with M6 male threads.

    It's now totally flexibly mounted. It doesn't stop any shit from hitting the rider but it looks good...mind you the original was no better.

    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

  6. #16  
    C-Moto Not-so-Noob Ricardo's Avatar
    Join Date
    Feb 2009
    Location
    Goiânia - GO - Brazil
    Posts
    33
    Good on you Forchetto!
    Owned:1969 Yamaha YF5 50cc, 1971 Yamaha YDS7 250cc, 1977 Honda ML 125, 1980 Honda CB 400, 1985 Honda XL 125 S, 1986 Kawasaki KLR 600, 1996 Honda CBX 200 Strada, 1998 Honda C-100 Dream, 2001 Honda CBX 250 Twister, 2007 Sundown Hunter 90
    Own:2008 Sundown STX Motard 200cc, 2017 Yamaha XTZ Ténéré 250cc Blueflex
    Reply With Quote  
     

  7. #17 Qingqi (Qlink, STX Motard, etc) Service manual 
    Honorary C-Moto Guru
    Join Date
    Jun 2008
    Location
    Gijon, Asturias, Northern Spain
    Posts
    580
    Have you seen the Service manual in Portuguese that Luis Carlos has uploaded?

    It's quite wonderful. Lots of ilustrations, every procedure explained and all data included for the Cross and Motard models of the STX Sundown.

    See message number 14 on this thread:

    http://www.mychinamoto.com/forums/sh...=6176#post6176
    Jincheng Monkey JC50Q-7
    Skyteam Dax replica ST110-6
    Zongshen ZS125-43
    Qingqi QM200GY-BA Super Motard
    Qingqi QM110GY
    Reply With Quote  
     

  8. #18  
    C-Moto Not-so-Noob Ricardo's Avatar
    Join Date
    Feb 2009
    Location
    Goiânia - GO - Brazil
    Posts
    33
    I haven't seen yet the manual, I've just downloaded it following your very useful hint indeed. We have to praise Luis Carlos for sharing with us all such valuable information.
    Three cheers for him!

    By the way, I improved a little bit more my Sundown STX Motard. I changed the original 12 tooth front sprocket for a 14 tooth Suzuki RM 250 front sprocket (original part). I ordered a 14 tooth front sprocket of the Suzuki DR 350, but the Suzuki dealer delivered to me the RM 250 part. In spite of that I could fit nicely the part, doing some minor adjustments as follows:

    - the inner flanged wall is wider than the sprocket width itself (certainly to deliver extra-strength for a motocross bike), so I simply removed the "metallic spacer" in order to re-use the flanged lock washer and to be able to safely tighten the front sprocket nut;

    - I had to open the chain at the master link and to connect the ends again after replacing the sprocket. I was fortunate enough to keep the original chain, which lenght was just exactly what I needed to re-assemble the whole set;

    - after the service (that was done last Monday, 23/03/2009) I washed thoroughly the whole set before putting back the sprocket cover, and went home to oil the chain (while it was hot due to normal friction) with Bardahl MaxLube oil (specific high viscosity oil for kart and motorcycle chains);

    - I am happy with the results up to now - in urban traffic - and I am looking forward to take the road to test properly the bike at different revvs and speeds. I am expecting to get a longer 4th gear, and a much longer 5th gear. In reality I am targeting a cruising speed of around the 100-115 km/h bracket revving at 7.000 rpm.

    - when I have some spare time I want to surf the Gearing Commander site ( http://www.gearingcommander.com/ ) in order to work on gear ratios; but, in reality I am expecting to check everything at the road and not virtually.

    All the best!

    Ricardo
    Owned:1969 Yamaha YF5 50cc, 1971 Yamaha YDS7 250cc, 1977 Honda ML 125, 1980 Honda CB 400, 1985 Honda XL 125 S, 1986 Kawasaki KLR 600, 1996 Honda CBX 200 Strada, 1998 Honda C-100 Dream, 2001 Honda CBX 250 Twister, 2007 Sundown Hunter 90
    Own:2008 Sundown STX Motard 200cc, 2017 Yamaha XTZ Ténéré 250cc Blueflex
    Reply With Quote  
     

  9. #19 Travelling with the Sundown STX Motard 
    C-Moto Not-so-Noob Ricardo's Avatar
    Join Date
    Feb 2009
    Location
    Goiânia - GO - Brazil
    Posts
    33
    Hi everybody

    I have new material concerning my daily usage and trips with my Sundown STX Motard. Please check at this link - http://www.caldas.com.br/30anos/motard_engl_1.htm .

    Cheers for all!

    Ricardo C. da Rocha Lima
    39 Years of Motorcycling
    Owned:1969 Yamaha YF5 50cc, 1971 Yamaha YDS7 250cc, 1977 Honda ML 125, 1980 Honda CB 400, 1985 Honda XL 125 S, 1986 Kawasaki KLR 600, 1996 Honda CBX 200 Strada, 1998 Honda C-100 Dream, 2001 Honda CBX 250 Twister, 2007 Sundown Hunter 90
    Own:2008 Sundown STX Motard 200cc, 2017 Yamaha XTZ Ténéré 250cc Blueflex
    Reply With Quote  
     

  10. #20 Genesis GXT200b = QingQi Supermotard 200 , IN COSTA RICA 
    C-Moto Not-so-Noob GXT200_Costarica's Avatar
    Join Date
    Jul 2009
    Location
    Costa rica 哥斯达黎加
    Posts
    20
    Genesis GXT200 = QingQi Supermotard 200 , IN COSTA RICA.

    and here Costa Rica this Same SUPUERMOTARD MOTOrcycle has more than 3 names

    Companies Names that sell Supermotard 200cc :

    GeneSis ---- GXT200b( mine)
    KATANA --->XF200
    QingQi----( idon have the Serie)
    UnitedMotors----UM 200cc Supermoto
    MotorCruiser---( idon have the Serie)
    and others .....
    Reply With Quote  
     

Page 2 of 6 FirstFirst 1234 ... LastLast
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •