Adventure Motorcycle Magazine Subscribe Now

Page 5 of 5 FirstFirst ... 345
Results 41 to 50 of 50
  1. #41 Re: Chinese engine identification 
     

  2. #42 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Nov 2015
    Location
    Milwaukee
    Posts
    1
    Good work
    Reply With Quote  
     

  3. #43 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Nov 2015
    Location
    Weston
    Posts
    6
    Here is the engine, barrel, piston and gudgeon
    Reply With Quote  
     

  4. #44 Re: Chinese engine identification 
    Senior C-Moto Guru Zorge's Avatar
    Join Date
    Oct 2009
    Location
    Σερβία
    Posts
    1,745
    Тhere is something wrong with that engine.

    Right crankcase cover is typical for "small bore" horizontals, electric starter too. But cylinder confused me. OK, it is 54 mm bore, but generally, this bore you can not see on "small bore" horizontals because spacing between cylinder studs does not allow that.

    Also, there is issue with stroke, because shaft that propels oil pump is so close to crank cheeks...

    But, what you need is to fix this engine and make few spins with your pit bike. If only piston was issue, I believe that MHJ's link will be useful to you.
    Ask me nothing - I DO NOT speak english. Really...
    Reply With Quote  
     

  5. #45 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Dec 2015
    Location
    knob noster
    Posts
    2
    I just bought a DJ152fmh pit bike and have no information on how/where to get parts or what will fit
    Reply With Quote  
     

  6. #46 Re: Chinese engine identification 
    Senior C-Moto Guru humanbeing's Avatar
    Join Date
    Dec 2008
    Posts
    1,509
    Quote Originally Posted by kyle37095 View Post
    I just bought a DJ152fmh pit bike and have no information on how/where to get parts or what will fit
    #1 rule owning "china machine" --- WYSiWYG. Find via picture that matches ALL the measurements.
    DJ(Many "Ducar" use that...) | 52(nearest bore) | H: 110
    http://item.taobao.com/item.htm?id=36141623524 may gives the idea.
    Reply With Quote  
     

  7. #47 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Dec 2015
    Location
    knob noster
    Posts
    2
    I need a new electric start cover and base plate where can I find the parts? It's a under engine electric start. Both cover and base plate have metal broke off
    Reply With Quote  
     

  8. #48 Re: Chinese engine identification 
    C-Moto Not-so-Noob
    Join Date
    Jul 2016
    Location
    Asia /Pakistan
    Posts
    33
    hi
    i have engine supposidely 125cc
    it is DJ1P54FMI

    where can i find its spec ?
    bore storoke ? CR ? Engine Oil Level (currenlty i poured 0.7L as the it gave the reading in the top range of dipstick) ? type of carb suitable for it ? (currently using pz22 with 32 pj and 85mj c clip is at the top to richen mixture).

    what could be inlet/exhaust valve clearance ?

    what are its gear ratios ?

    what is its stator specs ? how many watts it puts in each coil ? (it has 6 coil stator that is 83mm at the largest dia)

    is it full wave or half wave ?

    i bought the engine on as it is condition and installed in my bike which had initially jh90 type of engine.
    Reply With Quote  
     

  9. #49 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Aug 2021
    Location
    Estonia
    Posts
    1
    Based on the information on this thread, I made a quick little tool:
    https://dmonizer.github.io/chinamotors/
    Reply With Quote  
     

  10. #50 Re: Chinese engine identification 
    C-Moto Noob
    Join Date
    Apr 2023
    Location
    Wv
    Posts
    1
    My engine serial number is vz016103. What is vz for I can't find it any where
    Reply With Quote  
     

Page 5 of 5 FirstFirst ... 345
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •