Results 1 to 4 of 4
|
-
#1 Radial brake master cylinder to 650 NK?
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
01-31-2014, 03:22 PMI plan to change Radial master cylinder and replace OEM master cylinder BUT..!
Will I get buy with 14mm or do I need 17mm? what I have read bigger is not better as it might lead brakes feeling like wood..
and original cylinder is anyway 14mm??
reason why I do this is that I also plan to change clutch to hydraulic....
-
#2 Re: Radial brake master cylinder to 650 NK?01-31-2014, 07:39 PM
Do you mean change the caliper and the master cylinder? If not why only the master cylinder?
I changed the the pads to EBC, and it has improved the braking power and modulation a fair bit. I imagine switching the calipers to 4 piston from 2 piston would help, but would it really be cost effective?
Like people cutting their muffler, maybe iridium plugs and a higher flow air filter might be a more worthwhile power upgrade for a much less cash. Not that people who have already spent the money want to hear it.
-
#3 Re: Radial brake master cylinder to 650 NK?
- Join Date
- Jun 2013
- Location
- Hanoi, Vietnam
- Posts
- 182
02-01-2014, 02:44 AMWell at the moment only master cylinder as i also plan to try hydraulic clutch so I want to have same looking levers on the bike, i was thinking maybe later change whole front end to USD from kawasaki Zx-14 but that will be later on if i found right parts, not sure if those will clear plastic bits....
-
#4 Re: Radial brake master cylinder to 650 NK?02-02-2014, 03:09 PM
I think personally you'd be better advised going for performance upgrades rather than aesthetic upgrades. I like the idea of usd forks, but I'd worry that they'd fit properly.
« Previous Thread | Next Thread » |
Similar Threads
-
Odd horizontal cylinder engine
By Zorge in forum Modifications (Cosmetic and Performance)Replies: 3Last Post: 04-29-2013, 11:49 AM -
Brake master cylinder not pumping ......... Why ?
By Sprocket in forum MaintenanceReplies: 2Last Post: 03-13-2013, 07:15 AM -
upgrade cylinder
By leechew in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 08-24-2012, 09:35 AM -
cylinder head for rmr125
By 50dude in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 05-06-2011, 05:59 PM -
Rear Brake Master Cylinder parts
By txm123 in forum MaintenanceReplies: 11Last Post: 11-23-2009, 03:50 AM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions