Results 1 to 8 of 8
|
-
#1 Looking for a 75hp 4 stroke engine , TWIN
- Join Date
- Mar 2014
- Location
- France
- Posts
- 5
03-12-2014, 03:47 PMHello,
For a project I'm looking for a TWIN engine (ideal is flat , but VTwin is ok) , 4 stroke , that can give 75hp max ..
So far the closest I found is this one .. http://www.aliexpress.com/store/prod...754840901.html
But I'm sure I skipped a lot a models!
thanks
-
#2 Re: Looking for a 75hp 4 stroke engine , TWIN03-12-2014, 05:19 PM
I think Chery engines might fit this description; Renli uses those in their off road buggies.
http://www.renlivehicle.cn/product.a...1_id&page=2&id
-
#3 Re: Looking for a 75hp 4 stroke engine , TWIN
- Join Date
- Mar 2014
- Location
- France
- Posts
- 5
03-12-2014, 05:54 PMthanks for this contribution .. but unfortunatly they are 3 and 4 cylinders and ratio power/displacement is not great
Displacement :1083cc (812cc)
Standard Power :50KW/6000rpm(37KW/6000rpm)
this engine needs also to be reasonable weight (that why max 2 cylinders ... mono may be good is efficient balance shaft but has to be >800cc to reach a good power(what do you think of CVT700 : 36kw http://www.alibaba.com/product-detai...463450163.html )
Odes 800 is so far the one that almost matches ... (but need 10hp more...)
one I also found a 2 cyl inline but lost reference ...
-
#4 Re: Looking for a 75hp 4 stroke engine , TWIN
- Join Date
- Mar 2014
- Location
- France
- Posts
- 5
03-12-2014, 06:20 PMwell ,after looking around again and again found
52 kw .. someone to inform about engine price and net weight?
-
#5 Re: Looking for a 75hp 4 stroke engine , TWIN03-12-2014, 09:16 PM
Not familiar with the engine above; I forgot to mention, similar to Odes ( or might be the same manufacturer since that is how they seem to do it in China) is HiSun. They, too, have an 800cc, but it might come up short in your search for desired hp as well?
-
#6 Re: Looking for a 75hp 4 stroke engine , TWIN
- Join Date
- Mar 2014
- Location
- France
- Posts
- 5
03-12-2014, 09:34 PMtrue. looking at this (HiSun800) , it's very likely the same engine ..
I noticed that VTwin seems to be heavier for the power , but better specific fuel consumption. At least that is what is claimed... (350g/kwh for inline twin , 280 for VTwin)
-
#7 Re: Looking for a 75hp 4 stroke engine , TWIN03-13-2014, 12:06 AM
Scrowdilos I'm familiar with the CFMOTO 650cc 52KW engine shown a few pictures above. Nice engine and very decent torque, not sure about the weight, but I suspect it's similar to other engines of its type.
-
#8 Re: Looking for a 75hp 4 stroke engine , TWIN
- Join Date
- Mar 2014
- Location
- France
- Posts
- 5
03-13-2014, 12:13 AMthat one is probably the best starting point. I want to reuse all components except crankcase ,that I have to redesign for my use (no gearbox , new provision etc)
I wonder if it's doable as 2 parts for sand cast .. and the cost it can be (assuming I have the 3D solidworks model of my crankcase)
Is there a balance shaft in this model? by chance do you have a clear exploded view or pictures of dismantled one?
thanks
« Previous Thread | Next Thread » |
Similar Threads
-
Benelli 300 twin
By td_ref in forum Industry News and Moto TalkReplies: 2Last Post: 02-10-2014, 09:54 AM -
Pulse 125cc 4 Stroke
By AsaJupp in forum Welcome to MCM!Replies: 0Last Post: 01-25-2014, 06:11 PM -
New Motor Regal Raptor 900cc V-Twin (2013)
By xacarrere in forum Manufacturers and ImportersReplies: 22Last Post: 10-07-2012, 09:59 PM -
Selling my V-Twin 250 - Beijing
By Dani77 in forum Bike Market - ClassifiedsReplies: 0Last Post: 06-26-2011, 08:07 AM -
V-Twin Technicians in China
By Pal in forum AsiaReplies: 0Last Post: 06-05-2011, 03:35 PM
комедии 2024 руÑÑкие
Today, 07:03 AM in Off Topic Discussions