Thread: Bashan BS200GY-18
Results 91 to 96 of 96
|
-
#91 Re: Bashan BS200GY-1805-11-2016, 07:46 PM
That bike does not have your engine in it.
Some may have manuals, most do not. My best guess would be that you have an electrical short, a loose connection that every once in a while loses contact? If is dies abruptly and then starts right up that would be my best guess. The bikes engine is a version of the Honda CG125, there really is not that much to them. Haynes does make a manual for the CG125. It would be helpful for diagnosing. You can also find some basic parts like a CDI and coil etc. for the engine it’s a 167FMM CG version. If you feel you have to have a factory specific manual, then you are painting yourself into a corner, searching for the needle in the haystack. Does it have a kick stand kill switch start with that, a short in that would act the way you described.
-
#92 Re: Bashan BS200GY-1805-11-2016, 11:57 PM
Owner's manuals are used by people who care about their bike who takes time to read about their bike and how to fix it, but when you go to have tyre fitted or repaired in China and the "so called mechanics" inflates the tyre without a gauge to 80 lb pressure and tells you all is ok? how would workshop manuals come into play?
TIC (This is China) The logic free zone ?
So the Chinese owners and mechanics can just look at or touch a motorcycle and know how to fix it by magic powers?
"If you are lucky"
Some may have manuals,
Never seen one and most can't readLast edited by prince666; 05-13-2016 at 11:18 AM.
"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
-
#93 Re: Bashan BS200GY-1805-12-2016, 01:37 AM
The technology in these bikes are from the 60s-80s.Most anyone with some mechanical knowledge can keep them running.MJH is right,that book doesn't apply to these bikes.
-
#94 Re: Bashan BS200GY-1805-12-2016, 01:15 PM
Here is a link to the company selling those, http://www.peacesports.com/newsite/
They import from this factory, http://www.chinabashan.com/en/Index.asp
Here is a link to their Alibaba page.
https://bashan.en.alibaba.com/
They are operating out of Georgia, here is their face book page.
https://www.facebook.com/Peace-Sports-1251484044878177/
If you ask for a shop manual you will get ignored or get a run around response.
-
#95 Re: Bashan BS200GY-18
- Join Date
- Apr 2017
- Location
- Houston
- Posts
- 3
04-15-2017, 03:30 AMI just bought one, (BS250GY-18) a 2016 Bashan Storm.
Only put 150 miles on it so far. seems to be running ok...Last edited by Bkp; 04-15-2017 at 01:06 PM.
-
#96 Re: Bashan BS200GY-18
- Join Date
- Nov 2011
- Location
- fuck off
- Posts
- 528
04-24-2017, 07:15 AMVery few shop manuals, very generic specs and use specs common to something like a Japanese bike - Works fine etc.
I set most bikes tappets basically the same with good results, only ever been told tappet clearances by QingQi facrtory, Zhongshen RX3 I used the middle ranges I found on line, the CG and CB engines 0.06mm intake and 0.07mm exhaust and every time I set bike there is a power regain from before. Chinese bikes are a junker thing mostly and any common Western mechanic could logiclly work out what is OK etc.
Shineray Recommends 20W50 Diesel truck oil in their bikes - work that out!
« Previous Thread | Next Thread » |
Similar Threads
-
Bashan 重庆航天巴山摩托车制造有限公司
By MJH in forum Industry News and Moto TalkReplies: 21Last Post: 05-22-2015, 08:21 AM -
Bashan xplode 250cc
By kyton in forum Dirt n' Dual-SportReplies: 1Last Post: 02-07-2013, 09:29 AM -
Bashan 200s3 starting problems
By hippie nixon in forum ATV's/QuadsReplies: 1Last Post: 12-29-2012, 05:38 AM -
Bashan BS125GY
By NDak83 in forum Dirt n' Dual-SportReplies: 3Last Post: 11-04-2012, 04:51 PM -
Need Service Manual for Bashan 200St (Zongshen Engine)
By vlacexx in forum ATV's/QuadsReplies: 7Last Post: 09-02-2012, 01:45 PM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions