Thread: pulse adrenaline 125 rebuild
Results 1 to 10 of 25
|
-
#1 pulse adrenaline 125 rebuild
- Join Date
- Aug 2013
- Location
- wet wales
- Posts
- 65
04-20-2014, 06:57 PMi have just started the journey on rebuilding my adrenaline, i have a gs125 engine here for it and lots of other new add ons, i have only sprayed the frame so far as i need to get hold of a better swinging arm this week, i am hoping to have this project done within 2-3 weeks and am hoping you guys will be able to help me get it running again!
so i wire brushed the frame and gave it a good coat of jenolite
after a few coats of red oxide primer and a bit of flourescent green paint
finished of with a few more layers of flourescent green and 2k laquer
its currently curing by radiator in my living room, going to service the gs125 engine and paint it matt black while i wait for new swinging arm to arrive in post!
need to scrub the paint off my floor now in garden, should of used newspaper but as my name suggests i am impulsive :D
-
#2 Re: pulse adrenaline 125 rebuild
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
04-20-2014, 07:22 PMI love the color, it will look great once it's all put back together.
What do you need advice on exactly?Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#3 Re: pulse adrenaline 125 rebuild
- Join Date
- Aug 2013
- Location
- wet wales
- Posts
- 65
04-20-2014, 07:27 PMdont understand about the cdi unit with f4 engine, humanbeing gave me a link but i still dont understand it, do i use the adrenaline cdi and reconfigure the wires or do i use the f4 cdi and reconfigure the wires, really dont know!
http://www.motorfans.com.cn/bbs/t_658769.htm
also have new set of purple/blue plastics that i think were intended for the rmr125/200 all the same though aint they
-
#4 Re: pulse adrenaline 125 rebuild
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
04-20-2014, 08:42 PMSorry but I don't understand. What's an F4 engine? Are you trying to use a 3rd party CDI with your bike or something?
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#5 Re: pulse adrenaline 125 rebuild
- Join Date
- Aug 2013
- Location
- wet wales
- Posts
- 65
04-20-2014, 08:46 PMan f4 engine is the original suzuki gs125 engine from which the adrenaline was cloned from
http://www.ebay.co.uk/itm/Suzkui-GS1...item35cf700fcc
-
#6 Re: pulse adrenaline 125 rebuild
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
04-20-2014, 09:02 PMI think the origional Pulse Adrenaline CDI should work with it without any wiring mods.
Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#7 Re: pulse adrenaline 125 rebuild
- Join Date
- Aug 2013
- Location
- wet wales
- Posts
- 65
04-20-2014, 10:18 PMlook at human beings last post on my old thread here, still dont understand it myself http://www.mychinamoto.com/forums/sh...with-servicing
-
#8 Re: pulse adrenaline 125 rebuild
- Join Date
- Jan 2012
- Location
- Norwich
- Posts
- 408
04-21-2014, 07:33 AMIt's a thread about rebuilding a GS125, rather than trying to trying to understand the Google translation just ask your questions here.
The diagrams are pinouts for the CDI just in case if the connectors on the wiring loom and the don't match.Sinnis Max II (QM125-2V), K157FMI engine (technically a K162FMJ now), 115 main jet, 40 pilot jet, cone air filter, 150cc big bore kit, 17 tooth front sprocket, 30mm carburettor, alarm with remote start, HID spotlights, performance CDI.
-
#9 Re: pulse adrenaline 125 rebuild04-21-2014, 10:12 AM
If it's as stock Jap (ie. "30mm" rotor ).
Adrenaline cdi won't works perfectly. Jump wire is for test ONLY.
The proper one is like these http://item.taobao.com/item.htm?id=20126606124Last edited by humanbeing; 04-22-2014 at 12:49 AM.
-
#10 Re: pulse adrenaline 125 rebuild
- Join Date
- Aug 2013
- Location
- wet wales
- Posts
- 65
04-27-2014, 12:42 PMjust taking the engine apart now what you think of clutch look ok?
also removed the oil filter got new one here
and when i removed oil nut plug on bottom a nut and spring fell out also? will be taking other side off soon enough now!
« Previous Thread | Next Thread » |
Similar Threads
-
Pulsse adrenaline top end rebuild help?
By JordanRenton in forum MaintenanceReplies: 10Last Post: 01-26-2014, 11:09 PM -
pulae adrenaline 125 rebuild
By JordanRenton in forum MaintenanceReplies: 6Last Post: 11-23-2013, 12:10 AM -
Pulse Adrenaline 125
By superfamous in forum Modifications (Cosmetic and Performance)Replies: 7Last Post: 10-09-2012, 11:32 PM -
Pulse Adrenaline
By David-Hewitson in forum MaintenanceReplies: 1Last Post: 05-27-2012, 11:28 AM -
Pulse Adrenaline
By Rodders in forum Dirt n' Dual-SportReplies: 24Last Post: 02-01-2011, 04:47 PM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions