Thread: XTRS 125
Results 1 to 5 of 5
|
-
#1 XTRS 125
- Join Date
- Apr 2014
- Location
- United Kingdom
- Posts
- 6
04-23-2014, 05:59 PMSo, I'm getting valve rattle and have checked the clearances. How hard is it to remove and replace a broken valve or 2? Is it possible to be done with the engine in the frame?
61 Plate Lexmoto XTRS 125
-
#2 Re: XTRS 12504-24-2014, 01:09 PM
"OHC" 125 (aka CB clone) uses these valve(s) http://item.taobao.com/item.htm?id=36495486977
---
SizE:
http://www.tkrj.co.jp/goods/m-YH0380A-14711-KC6-950.php | http://www.tkrj.co.jp/goods/m-YH1380A-14721-KC6-950.php
-
#3 Re: XTRS 125
- Join Date
- Apr 2014
- Location
- United Kingdom
- Posts
- 6
04-24-2014, 02:06 PMYeh I can get hold of the Valve's easily and cheaply enough. Just wondering if its an easy job that can be done without removing the enging from the frame? As the valve covers are in awkward places.
61 Plate Lexmoto XTRS 125
-
#4 Re: XTRS 12504-25-2014, 08:41 AM
to replace the valves you need to remove the head . If you can remove the head then no need to remove the engine from the frame. Btw if the engine runs it doesn't have a broken valve. If its noisy then the clearance is too big or some moving part such as rocker or cam is worn.
-
#5 Re: XTRS 125
- Join Date
- Apr 2014
- Location
- United Kingdom
- Posts
- 6
04-25-2014, 01:22 PMAh good to hear! Shall have to give the rocker a good look over tomorrow and fingers crossed its just that.
61 Plate Lexmoto XTRS 125
« Previous Thread | Next Thread » |
Similar Threads
-
Xtrs Parts
By dudeofrude in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-20-2014, 11:48 PM -
lemoto xtrs 125
By xtrs125 in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 11-14-2013, 11:35 PM -
lexmoto xtrs
By weedod in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 05-19-2013, 11:23 AM -
Xtrs 125 and 30mm carb ?
By KILLERDOG in forum Modifications (Cosmetic and Performance)Replies: 6Last Post: 04-13-2013, 08:26 AM -
end can for lexmoto xtrs 125
By xtrs125 in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-19-2013, 10:46 AM
MedSolutions: Finding Solutions to...
Today, 08:28 AM in Off Topic Discussions