Thread: Chunlan CL-125 workshop manual
Results 1 to 10 of 17
|
-
#1 Chunlan CL-125 workshop manual
- Join Date
- Aug 2014
- Location
- UK
- Posts
- 7
08-04-2014, 04:20 PMHi,
I'm trying to fix my Chunlan CL-125-3 (sold here as Chunlan Tiger De Luxe), 2004. I'm a bit scared about opening the engine without knowing what to expect. Does anyone have, or know about, a workshop manual? Or something similar, spare part catalogue, any kind of drawing,...?
Thanks!
-
#2 Re: Chunlan CL-125 workshop manual08-04-2014, 10:19 PM
Domestic version:
Export version:
---
Engine: (Domestic) CB125T clone -From my rusty memory it's made by Lifan (Export) NOT sure 2 CDI/ twin carbs = CB125T clone (180 crank) | 1 CDI/ single carb = "CM" clone (360 crank)
Wiring: (Domestic) http://do.ejdz.cn:8087/%E6%91%A9%E6%...F%E5%9B%BE.gif Draws it http://www.pcmag.com/article2/0,2817,2422295,00.asp OR ask if don't know the meaning
===
Others: Compares to CM125C | http://www.bergamaschi.com/Download/...alogue_Low.pdf
www.huoniao-owners.co.uk [HN125-8 ...] is the place for later year alloy wheel "CM" copies. Some mods from there are suitable for ur bike.
---
What's the problem in ur bike? It maybe a simple fixLast edited by humanbeing; 08-05-2014 at 11:47 AM.
-
#3 Re: Chunlan CL-125 workshop manual
- Join Date
- Aug 2012
- Location
- zhongshan
- Posts
- 20
08-07-2014, 01:00 PMIf I remember, the engine of this bike has only 1 carb. So, it's a copy of the Honda CM 125. You can use the Honda Workshop manual. (Because, if you use the Chunlan workshop manual, you are not ready to sleep) .
How many kilometers is your "Tiger"?
-
#4 Re: Chunlan CL-125 workshop manual
- Join Date
- Aug 2014
- Location
- UK
- Posts
- 7
08-07-2014, 02:38 PMI have the export version (from MotoScoot, as the one on the pic), a twin carb (or two in one block), so I'll try to find the CB125T manual, thanks!
It has about 15000, from which about 1500 was in 2 days, then it died on me, probably from overheating or something... The engine stopped (I can't move it a bit), the gears are stuck (I can change only between 4 and 5) and the oil level gauge is half melted. I will try to open the engine this weekend...
-
#5 Re: Chunlan CL-125 workshop manual
- Join Date
- Aug 2012
- Location
- zhongshan
- Posts
- 20
08-09-2014, 08:18 AMSo, obviously, your engine seized. Il the oil gauge has melted, certainly the overheat came from a lack of oil or a crankshaft bearing. (Which was current on this bike but, curiously, this problem is supposed to come before 15,000 Km) Look like your bike was a very good one.
-
#6 Re: Chunlan CL-125 workshop manual
- Join Date
- Aug 2014
- Location
- UK
- Posts
- 7
08-09-2014, 10:09 AMWell, I got the CB125 manual, opened the engine head and it's quite different from the manual - camshaft chain is between the pistons, it's a multiple chain, etc.
a bit OT: The largest problem we are having right now is, that we can't turn the engine (it's seized), so we can't disassembly the chain, and also we can't open the right crankbox cover (the one near clutch) either. We took out all the bolts, but the cover wouldn't move at all. So no way to get inside... any ideas?
P.S.: there was plenty of oil, so that's not a problem...
-
#7 Re: Chunlan CL-125 workshop manual08-09-2014, 12:20 PM
http://homepage.ntlworld.com/dr.watson/HaynesCM125.pdf
http://www.impex-jp.com/catalogs/mot.../11kc1fj7.html
---
What tool is on hand? Penetrating oil + impact wrench will frees the bolt mostly.
If can't sloves from here. U may ask it in http://www.bikechatforums.com/viewforum.php?f=33. There's a bloke http://www.bikechatforums.com/profil...rofile&u=65219 that had lots experiences about Honda twin.
-
#8 Re: Chunlan CL-125 workshop manual
- Join Date
- Aug 2014
- Location
- UK
- Posts
- 7
08-09-2014, 01:50 PMThanks a lot for the links, that's the kind of engine I have! Are they really identical (a clone)? I.e. can I buy a Honda engine and mount it to my Chunlan?
I was able to release the bolts, that's not a problem, the problem is, that even after that (with all the bolts out) the right cover doesn't go off the engine... In the first manual you've posted, page 47 (48 of pdf), where we should use a soft mallet to tap lightly around the cover to break the seal, we hammered it quite hard (hammer through a piece of wood), but without success...
-
#9 Re: Chunlan CL-125 workshop manual08-09-2014, 10:44 PM
Haynes = http://www.mez.co.uk/haynes.html
---
Cut it gently
OR
Heated then cools it quick
---
http://www.hondatwins.net/forums/40-...ase-cover.htmlLast edited by humanbeing; 08-11-2014 at 01:31 AM.
-
#10 Re: Chunlan CL-125 workshop manual08-09-2014, 10:52 PM
Agree with humanbeing, cut at the seam, heat it up (a bit), cool it off and remove it.
« Previous Thread | Next Thread » |
Similar Threads
-
Steve's ChunLan 250-3 (春兰250-3)
By Steve_Halt in forum StreetReplies: 24Last Post: 07-11-2013, 09:25 AM -
tmec 125 enduro owners manual and workshop manual
By cchristheman in forum Parts DeskReplies: 1Last Post: 05-12-2013, 08:14 PM -
atv front end setup ????workshop manual ???
By woolie in forum ATV's/QuadsReplies: 1Last Post: 09-25-2011, 08:08 AM -
Workshop manuals
By smithyUK in forum MaintenanceReplies: 5Last Post: 02-11-2010, 11:29 PM -
Workshop manual SYM Jet 50/100 scooters
By forchetto in forum ScooterReplies: 0Last Post: 07-27-2008, 07:13 PM
Tags for this Thread |
Prime Сasual Dating - Real-life...
Today, 08:19 AM in Off Topic Discussions