Adventure Motorcycle Magazine Subscribe Now

Page 5 of 29 FirstFirst ... 345671525 ... LastLast
Results 41 to 50 of 285
  1. #41 Re: Honda CT70 Clones. 
    C-Moto Senior
    Join Date
    Aug 2013
    Location
    Strood, Kent
    Posts
    149
    I am running a 31 tooth rear sprocket too. Any smaller and I think the hub needs to be machined down.
    Reply With Quote  
     

  2. #42 Re: Honda CT70 Clones. 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    trexuk,
    I counted the front and rear sprockets and came up with 15/32 which sure is different from your stock bike at 14/38.
    I'd better go recheck my rear sprocket. Our bikes really differ in the stock sprockets. What am I missing? You must have really been geared low.

    You were 14/38=2.71 ratio
    Then 16/36=2.25
    Now 17/31=1.82

    Mine is 15/32= 2.13
    Will be 17/32= 1.88
    So we will end up about the same.

    BTW: The Pitster Pro 125 manual is the same as mine.
    http://www.pitsterpro.com/uploads/do...c%20Manual.pdf

    And some parts are at
    http://shop.pitsterpro.com/pitsterpr...coemparts.aspx
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  3. #43 Re: Honda CT70 Clones. 
    C-Moto Senior
    Join Date
    Aug 2013
    Location
    Strood, Kent
    Posts
    149
    I have no way of knowing if mine was geared like it was as stock or if the previous owners changed the gearing? Mine is slightly different from yours being as its a 110cc.
    Reply With Quote  
     

  4. #44 Re: Honda CT70 Clones. 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    I ordered the 17 tooth front and a 420 repair kit in case I need to add length to the chain.
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  5. #45 Re: Honda CT70 Clones. 
    C-Moto Senior
    Join Date
    Aug 2013
    Location
    Strood, Kent
    Posts
    149
    I had to remove 1 link from mine when i fitted the sprockets. Thankfully my chain had a speedlink in it, so it was quite easy. I am going to order a new chain this week as the current one runs tight and slack when you revolve the rear wheel.
    Reply With Quote  
     

  6. #46 Re: Honda CT70 Clones. 
    Senior C-Moto Guru culcune's Avatar
    Join Date
    Apr 2008
    Location
    Yuma, Arizona (the 3:10 left me here)
    Posts
    1,624
    I wonder, and believe if true, the Skyteam 125cc uses a Loncin or Zongshen engine which would have slight differences from the 110 in the Lifan, as Trexuk has. I do remember American Lifan had the DAX replicas in 110cc form in the US (maybe Canada), until Honda sent them a cease and desist letter (I think they sent Redcat and a few others the same letter, too, back in the mid 2000's).
    Reply With Quote  
     

  7. #47 Re: Honda CT70 Clones. 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    Put the 17 tooth sprocket (JT Sprocket JTF252.17 ) in place of the stock 15 on the CT70 clone and it really extends first gear. Took a ride to Deal's Gap to test her out. Did run her up to 50 MPH indicated for a short spurt. Still breaking her in.

    Sprocket from http://www.amazon.com/dp/B001AVVXPY/...32200_TE_item#
    Ordered two more for the monkey bikes.


    Stopped at a place where two brothers on separate bikes where killed by a single auto running wide in a curve. I put up a cross last year and someone planted some flowers under it. Nice touch probably from a family member or friend.

    1001141646a.jpg
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

  8. #48 Re: Honda CT70 Clones. 
    Senior C-Moto Guru culcune's Avatar
    Join Date
    Apr 2008
    Location
    Yuma, Arizona (the 3:10 left me here)
    Posts
    1,624
    Quote Originally Posted by barnone View Post
    Put the 17 tooth sprocket (JT Sprocket JTF252.17 ) in place of the stock 15 on the CT70 clone and it really extends first gear. Took a ride to Deal's Gap to test her out. Did run her up to 50 MPH indicated for a short spurt. Still breaking her in.

    Sprocket from http://www.amazon.com/dp/B001AVVXPY/...32200_TE_item#
    Ordered two more for the monkey bikes.


    Stopped at a place where two brothers on separate bikes where killed by a single auto running wide in a curve. I put up a cross last year and someone planted some flowers under it. Nice touch probably from a family member or friend.
    I would be interested to read how the sprocket on the Ice Bear works out--I figure the other Skyteam will be similar to your Skyteam DAX clone.

    How far are you from 'The Dragon'?

    Nice gesture on the cross part. I am amazed by how many crosses I see on trips from Yuma to Phoenix, or Yuma to San Diego!
    Reply With Quote  
     

  9. #49 Re: Honda CT70 Clones. 
    C-Moto Senior
    Join Date
    Aug 2013
    Location
    Strood, Kent
    Posts
    149
    Barnone: What size sprocket have you got on the rear?

    Nice touch with the cross, sadly there are many of these road side memorials in the UK too. Thousands of people die each year on our roads.
    Reply With Quote  
     

  10. #50 Re: Honda CT70 Clones. 
    Senior C-Moto Guru barnone's Avatar
    Join Date
    Dec 2009
    Location
    SWFL WNC
    Posts
    2,154
    Quote Originally Posted by trexuk View Post
    Barnone: What size sprocket have you got on the rear?

    Nice touch with the cross, sadly there are many of these road side memorials in the UK too. Thousands of people die each year on our roads.
    32 tooth rear.
    Forgot to mention that the stock chain worked with the new 17 tooth front without adding length.

    Where are the other CT70 clone owners? Should be some more on this site.
    Vince
    2021 Ural cT
    2022 Dong Fang DF250RTG
    2021 Ice Bear 150cc scooter
    2020 Ice Bear 150cc Scooter
    Reply With Quote  
     

Page 5 of 29 FirstFirst ... 345671525 ... LastLast

Similar Threads

  1. Honda Monkeybike Clones
    By fiddyduke in forum Scooter
    Replies: 1
    Last Post: 07-04-2014, 08:48 PM
  2. Honda Ace 125
    By kologha in forum Street
    Replies: 4
    Last Post: 09-10-2012, 03:11 AM
  3. Honda WY 125-C Oil
    By motomatt in forum Maintenance
    Replies: 5
    Last Post: 08-01-2012, 09:59 PM
  4. Honda CRM 250
    By CRM250 in forum Bike Market - Classifieds
    Replies: 9
    Last Post: 11-11-2011, 02:56 AM
  5. Replies: 6
    Last Post: 01-25-2011, 07:51 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •