Results 1 to 3 of 3
|
-
#1 all electrics work but wont start! but will start when i unclip the ignition loom?
- Join Date
- Mar 2009
- Posts
- 6
03-22-2009, 01:59 PMall electrics like indicators and lights and brakes and electric start works on my sj125gy-3a but no spark? but when i detach the ignition loom it sparks then and starts? what could it be? iv checked the wires and they look fine.
thanks
Last edited by maddog23; 03-24-2009 at 11:35 AM.
-
03-31-2009, 02:02 AM
Maddog,
What do you mean by the ignition loom?
Can you get a spark against the engine case with the plug on the wire?
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
- Join Date
- Jun 2008
- Location
- Gijon, Asturias, Northern Spain
- Posts
- 580
03-31-2009, 08:42 AMJust speculating, but I think by disconnecting the ignition loom you're isolating the kill switch and the engine starts. Either you have the kill switch in the wrong position or it's shorting to chassis internally.
These switches work by short circuiting the CDI module input to chassis.Last edited by forchetto; 04-03-2009 at 07:07 PM.
Jincheng Monkey JC50Q-7
Skyteam Dax replica ST110-6
Zongshen ZS125-43
Qingqi QM200GY-BA Super Motard
Qingqi QM110GY
« Previous Thread | Next Thread » |
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions