Thread: Hello
Results 1 to 2 of 2
|
-
#1 Hello
- Join Date
- Oct 2014
- Location
- Chesterfield, UK
- Posts
- 2
10-17-2014, 06:33 PMHi guys, my names Jonno, i'm from Chesterfield in the UK and I own an RMR Superbyke 125, ive had it for just over a year now and use it to commute on.
Iveowned a KTM Superduke 990
A Triunph Speed Triple 1050
A Triumph TT600
2X Suzuki GS500E's
A CG125
I Currently have an MV Agusta F4 312RR
A Triumph Daytona 675
The RMR
and a Cagiva Mito (about to recieve a GS500 Turbo engine)
Ive been trawling the forums for month picking up what I can and i'm a little confused.
Firstly, does the RMR 200 Barrel and Piston fit the RMR125,
Secondly, i'm Running a free flowing filter, SAIS block off, completely debaffled exhaust (stubbied), but im struggling with Jet Settings
I have jets 90-140, best out put was with a 135 jet, needle on 1st clip.
Is this right?
Thanks!
-
#2 Re: Hello10-18-2014, 01:41 AM
NO.
125 pin =14mm http://item.taobao.com/item.htm?id=36151644016 | 200 pin=16mm http://item.taobao.com/item.htm?id=36142461269
---
125 to 200 http://www.motoyes.cn/bbs/forum.php?...1&authorid=27l
EN150 (Balance shaft model) crank & 65.5 piston http://www.motoyes.cn/bbs/forum.php?...d=54237&page=1 This man found that "dumbie" forgot to cut the "U shape" when installing 62 kit + "crazy" ideas (radiator's position…)
GZ150 /GSX150 crank (non- balanced) & piston(s)
http://www.motorfans.com.cn/bbs/view...originator=yes | http://www.motorfans.com.cn/bbs/view...originator=yes
---
62mm kit is the easiest way to +cc
http://item.taobao.com/item.htm?id=37368510898 Option 3 (euro 2 二/ black 黑 / flat 平)Last edited by humanbeing; 10-18-2014 at 12:04 PM.
« Previous Thread | Next Thread » |
комедии 2024 русские
04-29-2024, 07:03 AM in Off Topic Discussions