Adventure Motorcycle Magazine Subscribe Now

Results 1 to 10 of 10
  1. #1 Riding a Chinese bike into Vietnam 
    C-Moto Noob
    Join Date
    Feb 2015
    Location
    Kunming
    Posts
    5
    New to the forums. Bought a Galaxy XTR250 a few weeks ago, got my driving licence shortly after and am now planning to ride to the country of my dreams: Vietnam. I've been wondering and searching to no avail: what paperwork does one need (other than a visa) to ride a motorbike with a Chinese licence plate (云A) into Vietnam, preferably across the border at Hekou, Yunnan?

    I know they'll let you exit China, but the Vietnamese won't let you enter without the right documents, but no one can tell me what those documents are. Any ideas?
    Reply With Quote  
     

  2. #2 Re: Riding a Chinese bike into Vietnam 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    AFAIK you cannot ride a MC from any other country into Vietnam officially without organising an officially approved guide and paying relevant fees. Even then I am of the understanding that trying to get a PRC plated bike into Vietnam is almost near on impossible. Basically the same as what Ch!na does for anyone wanting to enter PRC territory on any bike plated from outside e.g. while PRC plated bikes can enter Laos, Thailand, Malaysia etc, the same arrangements are not reciprocated. Meaning MC's from Cambodia, Laos, Thailand, Malaysia cannot enter PRC without first arranging for an approved travel guide (who will arrange, temporary PRC DL testing, temporary licence plate, and insurance etc). However unofficially this might differ if you were to turn up at the chosen border unannounced. Now should you go and are successful then by all means post back here and share your experience.
    Learn the rules like a pro, so you can break them like an artist
    - Pablo Picasso
    Reply With Quote  
     

  3. #3 Re: Riding a Chinese bike into Vietnam 
    C-Moto Noob
    Join Date
    Feb 2015
    Location
    Kunming
    Posts
    5
    Thanks for the info. So judging from this info, it wasn't possible at Hekou but they also didn't tell him what he really needed. Exit and Entry permit is nonsense.

    So it may be what you said it was. That means Vietnam is out. Darn.
    Reply With Quote  
     

  4. #4 Re: Riding a Chinese bike into Vietnam 
    Life Is Good! ChinaV's Avatar
    Join Date
    May 2008
    Location
    Guangdong, China
    Posts
    1,508
    Felix and I were going to do this, but the import hassle and time lost riding to Vietnam wasn't worth it. We rented bikes in Vietnam instead. Much easier, and turned out to be better in the long run because the bikes took a massive beating.

    Cheers
    Reply With Quote  
     

  5. #5 Re: Riding a Chinese bike into Vietnam 
    C-Moto Noob
    Join Date
    Feb 2015
    Location
    Kunming
    Posts
    5
    Quote Originally Posted by ChinaV View Post
    Felix and I were going to do this, but the import hassle and time lost riding to Vietnam wasn't worth it. We rented bikes in Vietnam instead. Much easier, and turned out to be better in the long run because the bikes took a massive beating.

    Cheers
    Haha good point. Just not as cool as riding your own that you trust. Did you ever learn what the import hassle entails and whether, as bikedoctor suggests, you have to let a third party do it for you?
    Reply With Quote  
     

  6. #6 Re: Riding a Chinese bike into Vietnam 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    OP have you thought about riding from Yunnan into Loas and/or Thailand? Northern Thailand is great for MCing IMHO. Both countries are doable on PRC plated MC's. I have been riding in Northern Thailand the past 6 weeks having ridden down and across from Ningbo (3900km in 48 hours with 1 hours sleep just to get to Kunming). By day 3 and some 4900km later I was at the Laos-PRC border, crossing over the Chiang Khong bridge. Yes, MC's can cross the bridge but one has to pay CNY100 (500BHT) for the privilege and then be escorted across. Car drivers only pay CNY20 (200BHT) and drive across unescorted. However it beats having to put the MC on the old ferry at the old crossing point 10km away and then the rider still has to go back and cross on the new Chiang Khong bridge paying and using a shuttle bus (meaning the rider and bike are separated - as rider is not allowed on the ferry any longer - so bike travels unaccompanied).

    This is my second Xmas New Year in Northern Thailand having come over from China. The riding, people, attitudes, etiquette, availability of stopping for food/drinks/beverages at every turn, along with a more genuine engagement with the local population... makes riding in Thailand a much more worthwhile and engaging experience IMO and beats PRC hands down. That and the observation that Thais driving skills and behaviour is far superior to that of PRC drivers and riders IMHO.

    YMMV
    Last edited by bikerdoc; 02-15-2015 at 03:15 AM.
    Learn the rules like a pro, so you can break them like an artist
    - Pablo Picasso
    Reply With Quote  
     

  7. #7 Re: Riding a Chinese bike into Vietnam 
    Life Is Good! ChinaV's Avatar
    Join Date
    May 2008
    Location
    Guangdong, China
    Posts
    1,508
    Quote Originally Posted by bluppfisk View Post
    Did you ever learn what the import hassle entails and whether, as bikedoctor suggests, you have to let a third party do it for you?
    Yes, we made all the arrangements and it was going to cost us somewhere between 500~1000 USD if I remember right for 18 days.

    The reasons we didn't use our bikes:

    #1 Not much parts support for Chinese bikes in Vietnam.
    #2 We would have used a lot of valuable vacation time getting to Vietnam.
    #3 The cost of the permits and paperwork was almost the cost of the rental bikes. We started with new tires, chains, sprockets, and brakes. All had to be replaced at the end of our trip.
    #4 Honda XR250's were better bikes than Chinese 250's.
    #5 The "fixer" told us we had to give a pretty detailed itinerary and stick to it, including hotels etc. We wanted more freedom and using rentals allowed us to change our plans.

    If you want to rent, go to Flamingo Travel . Don't waste your time with Minsks or scooters, get an XR.

    If you are really serious and have the money for a fixer, I can put you in touch with "the guy". GRF_Hans connected us and he was very professional.

    It took us 17 days to cover the country and the rental guy said he had never seen two people cover so much mileage in such a short time.



    Cheers!
    Reply With Quote  
     

  8. #8 Re: Riding a Chinese bike into Vietnam 
    Life Is Good! ChinaV's Avatar
    Join Date
    May 2008
    Location
    Guangdong, China
    Posts
    1,508
    Quote Originally Posted by bikerdoc View Post
    (3900km in 48 hours with 1 hours sleep just to get to Kunming). By day 3 and some 4900km later I was at the Laos-PRC border,
    That's fucking insane

    3900 km in 48 hrs = 81.25 kmh moving speed. That means you were doing well over 100kmh almost every minute you were on the road. I'm guessing you got on the gāosł?

    Cheers!
    Reply With Quote  
     

  9. #9 Re: Riding a Chinese bike into Vietnam 
    KING of MCM LOL prince666's Avatar
    Join Date
    Apr 2012
    Location
    china (Longkou), Hainan
    Posts
    2,002
    I said the same to the Doc when I met him at the border town of Chiang Khong and yes ChinaV he did use the Expressways all the way down apart I think for the first 300 km out of Ningbo when the Doc needed to find a appropriate on to the expressways !! mad and insane
    riding by the Doc but kudos to him
    "Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
    Reply With Quote  
     

  10. #10 Re: Riding a Chinese bike into Vietnam 
    foreign China moto dude bikerdoc's Avatar
    Join Date
    Oct 2009
    Location
    Zhejiang PRC, OZ, NZ
    Posts
    2,389
    Quote Originally Posted by ChinaV View Post
    That's fucking insane

    3900 km in 48 hrs = 81.25 kmh moving speed. That means you were doing well over 100kmh almost every minute you were on the road. I'm guessing you got on the gāosł?

    Cheers!
    Agree totally. I rode the first 5 hours or thereabouts from Beilun - Tonglu via Shengzhou & Yiwu. My rational was simple, I wanted to get onto the Expressway via an on-ramp that had as short an entry to the actual toll booths as possible, thereby minimising any intervention by the authorities. The strategy worked. Once on the Expressway I wanted to stay on for as long a distance as possible, hence the non-stop approach. I figured if I could ride for as long as possible before any intervention and likely removal, I'd then look for a hotel if and when that might have occurred. It didn't so I rode and rode, stopping only for fuel. I took 6 packs of meals that come with everything needed to prepare a hot meal on the go. The container, contents include rice in a plastic container, under which there is a packet that has some type of powder substance with a semi-permeable membrane, a bag containing water, a foil packet containing minced type meat with veggie's. Prep everything onto the bed of rice, empty water onto the white packet containing substance, place smaller rice container with meat etc on top and cover with lid. The water and white substance react causing the water to boll. Hot meal done.

    I was able to remain on the Expressway all the way until Kunming. I avoided service centres on the Expressways and chose quieter locations with petrol stations that had easy entry/exit from the Expressway to minimise any detection. Meaning I did not ride through the Service Areas and avoided the restaurants etc., where possible.

    I was fortunate to not have any significant hurdles at provincial border toll stations. Only one police officer attempted to stop me as I rode through one set of provincial tolls, on the other side through the road cone choke point. Strategy = head down, arse up, (throttle, throttle, throttle) and stay out off the radar as much as possible. I attempted to sleep sat on the bike seat a couple of times in the early hours at or near two petrol stations, but my really sore numb bum didn't allow that to really happen for more than half an hour.

    I'd not posted about my ride, simply because there wasn't much to share, no photos, no real hassles, and only half a dozen or more crashes, where roll overs seemed the order of the night or early morning. I did get some surprised looks from the Police in attendance at those crash scenes as I rode my GS past though aside from being on a motorcycle - I was wearing a high-viz yellow jerkin too, which made them all the more surprised I'd guess.
    Learn the rules like a pro, so you can break them like an artist
    - Pablo Picasso
    Reply With Quote  
     

Similar Threads

  1. bike wont go above second gear while riding
    By Phantom82 in forum Maintenance
    Replies: 3
    Last Post: 09-29-2014, 03:50 AM
  2. Riding an 'export' bike out of China
    By culcune in forum Industry News and Moto Talk
    Replies: 3
    Last Post: 08-14-2014, 06:39 AM
  3. Replies: 0
    Last Post: 03-07-2012, 04:28 AM
  4. Riding China bike in florida. Qlink XF200
    By Cab4less in forum Welcome to MCM!
    Replies: 3
    Last Post: 03-15-2011, 07:41 AM
  5. Buying a bike in China and riding home with it
    By Nostro in forum Ride Prep and Making Tracks
    Replies: 17
    Last Post: 11-27-2010, 08:37 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •