Thread: Hi! Riding school in China
Results 1 to 10 of 12
|
-
#1 Hi! Riding school in China
- Join Date
- Jun 2014
- Location
- Shanghai
- Posts
- 11
05-06-2015, 12:57 PM
hi,
Been living in China for several years, been riding on an e-bike for quite some time.
Have long wanted to get a motorbike in China but face the following difficultiy:
Don't have a drivers licence in my own country (for car or motorbike).
I've found a school in HongQiao district (http://www.shjtpx.com/)
that apparently offers both the lessons, practical driving experience and the examinations. If not ok to post links mods feel free to delete (i'm not advertising).
A few questions if i can:
Is it possible to just get an E licence without the car licence? I.e don't need a C1E licence.
Can this be done on a temp residence permit which only has 60 days left validity? I will be getting a new residence permit in July however that'll be valid for 6 months.
That's basically all the questions I have. The price for the licence seems quite cheap for just an E licence, 1500rmb (might be added costs I haven't taken into account), so i'm happy about that.
Also apart from that for a beginner bike i was thinking the YBR250. I'm guessing the engine will be of good build quality, but the rest of the bike not so much. I'm open to suggestions about other bikes, but id rather not go above 250cc on my first bike. Also the bike has to be one of the ones that can be legally registered here.
My main concern bike-wise is seat height, don't want to look like a giant on the bike or to be uncomfortably crouched. I'm 6'1 exactly. Some sites say the seat height is 805mm, others 780mm. So i'm not quite sure how heigh the seating is. What would you veterans recommend seat height wise for someone who is 6'1 will longer legs average for torso?
Thanks for any advice :) Mods feel free to move this if it is in the wrong section.
-
#2 Re: Hi! Riding school in China
05-06-2015, 03:04 PM
Might not be possible to get anything as test according to a few people cannot be taken in English at the moment, worth trying, and yes, I had a friend who took the entire MC test in China, not car.
I believe you need 90 days.
YBR250 is a great bike for a beginner. I think they call in YS250 now, but pretty much the same thing. I'm 6ft and the YBR250 wasn't unduly cramped for me.
-
#3 Re: Hi! Riding school in China
05-06-2015, 03:58 PM
Hi and welcome
If this is going to be your first ever motorised bike (not Inc Ebikes) then I would recommend you start with a little bit smaller then a 250cc this is just my 2 cents
90 days is the min, most province ask for 180 days visa ???
Good luck and keep the forum updated with your progress please"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
-
#4 Re: Hi! Riding school in China
- Join Date
- Jun 2014
- Location
- Shanghai
- Posts
- 11
05-06-2015, 04:05 PM
Seems odd that a car driving test can be taken in English but not a motorbike exam... i'll ask the school about that. Would take a ton of extra effort to learn the questions themselves and not just the answers. I'm only hsk 4 level. With effort I could pass it even if it is in Chinese. From a google search it appears it is available in English.
The 90 day visa isn't a problem, just means need wait a month. Might as well go in to the school anyway and pay for some exam prep/study materials and just take it slow.
Are there any 250cc legal bikes here that have a higher seat height than the ys250? Specs say 800mm, aren't most bikes very similar in seat height to that despite engine displacement? There's confidence from being able to put my feet flat on the ground, but i dread not just being crouched up on it but looking like a giant on a tiny bike ;)
PS Anyone know of a book/source either online or offline that has the motorbike exam bank of questions? Google isn't helping.Last edited by apoftelbrau; 05-06-2015 at 04:27 PM.
-
#5 Re: Hi! Riding school in China
05-06-2015, 04:48 PM
Are there any 250cc legal bikes here that have a higher seat height than the ys250? Specs say 800mm, aren't most bikes very similar in seat height to that despite engine displacement? There's confidence from being able to put my feet flat on the ground, but i dread not just being crouched up on it but looking like a giant on a tiny bike ;)
PS Anyone know of a book/source either online or offline that has the motorbike exam bank of questions? Google isn't helping.
If you need a bike with a much higher seat high then you need to look at a dual sports bike which will in it design have a much higher seat.
Try "Drive in China " App https://itunes.apple.com/us/app/driv...486138822?mt=8"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
-
#6 Re: Hi! Riding school in China
- Join Date
- Feb 2015
- Location
- Shanghai
- Posts
- 53
05-06-2015, 05:11 PM
Ive been to that school, you'll need a proper resident permit that is given to you in shanghai, it's the one where they put it in your passport. If you hold a student visa or work visa then you can get one or any other visa that gives you full residency unlike the tourist or business visas that just get your temporary one.
As I say, I've been to the school and wore that shitty T-shirt, they're the typical idiots who don't know anything and no you can't do the test in English. So if you have the above residency permit and you're good at memorising, get studying. If you don't have the above residency permit then don't waste your time. I spent the majority of 4 hours messing about with health checks to be told I can't do it.
-
#7 Re: Hi! Riding school in China
- Join Date
- Jun 2014
- Location
- Shanghai
- Posts
- 11
05-06-2015, 05:21 PM
I have the residency permit, it is a residency permit but says temp, just it will expire 31st of June. Is the 90 day rule true?
Shame it can't be done in english, i wonder if other schools allow it to be taken in english or if that is a universal rule for the exam across Shanghai. Thanks for your reply. I'm also wondering if i can get a list of all the questions and answers from them straight away (for a small fee) so that i can start studying up.
As far as bike choice, the XTZ125 does indeed have a much higher seat. Thing is, isn't a bit odd to be riding a dual sport bike in Shanghai? There's no off road here. Apart from commuting around shanghai on the bike, i'd like the occasional long distance trip out of Shanghai. Way out of my field of knowledge, but can a custom seat be put on the ys250 to add a couple inches to the seating height?
-
#8 Re: Hi! Riding school in China
05-06-2015, 07:14 PM
Apart from commuting around shanghai on the bike, i'd like the occasional long distance trip out of Shanghai.
Now the seat if you need more high then why not just have the seat recovered like in the picture
seat.jpg
seat1.jpgLast edited by prince666; 05-07-2015 at 07:07 AM.
"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
-
#9 Re: Hi! Riding school in China
- Join Date
- Jun 2014
- Location
- Shanghai
- Posts
- 11
05-06-2015, 11:52 PM
Great idea.... actually did this for my e-bike. Was fun to watch them shape the foam then you get to select from a large range of different finishing material. On the e-bike i had them replace the front and rear forks which gave me a lot of extra height overall on the bike (can that be done on a moto without messing up the handling/safety of it etc?). 2 extra inches from that would be great (and hopefully not look weird :) )
I'll take a look at the bike over the weekend, im sure i'll be able to sit on it in the store. Last time i went to a bike store i saw a lot of hondas, they were so small that they looked a bit like toys.
I'll keep the thread updated, will visit the school soon and start when i get my new visa next month.
Basically final question for now: what is considered a normal seat height on a sport bike for someone around 6 foot 1? I guess it also depends on where the foot pegs are but a rough estimate would be nice. TY.Last edited by apoftelbrau; 05-07-2015 at 12:47 AM.
-
#10 Re: Hi! Riding school in China
05-08-2015, 09:21 AM
Basically final question for now: what is considered a normal seat height on a sport bike for someone around 6 foot 1? I guess it also depends on where the foot pegs are but a rough estimate would be nice. TY.
I would say for you about 850mm to 900mm
Have a look at the link you can use a make of bike to check riding position and can change the riders details to see what suits you best
http://cycle-ergo.com/"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
« Previous Thread | Next Thread » |
Similar Threads
-
China Bikes for Two-up Riding
By Meiguo-007 in forum StreetReplies: 7Last Post: 04-24-2014, 02:57 PM -
Defensive Riding in China (what to look for)
By ZMC888 in forum AsiaReplies: 12Last Post: 04-18-2012, 01:32 AM -
Riding through China
By bigboy2 in forum Welcome to MCM!Replies: 5Last Post: 03-06-2012, 12:13 AM -
Riding blog in Taiwan and China
By matt999tye in forum Ride, Record, CreateReplies: 2Last Post: 11-28-2010, 07:19 AM -
Riding In China FAQ Help...
By CrazyCarl in forum AsiaReplies: 0Last Post: 01-29-2009, 03:39 PM