Thread: Adjusting the Idle Screw
Results 1 to 3 of 3
|
-
#1 Adjusting the Idle Screw
- Join Date
- Jun 2015
- Location
- Ashford, Kent
- Posts
- 1
06-27-2015, 02:08 PMHello everyone.
I own a 2011 Zongshen Arizona 125 cruiser and I am having a spot of bother with it.
I'm putting it back on the road after being out for a year and a half. I've cleaned the carburetor thoroughly and changed the spark plug but she will not idle after warming up regardless of my choke setting.
I'm considering adjusting the idle screw to see if that solves the issue but I kinda don't know which screw is the idle screw. The carb I have can be found: http://www.chinesemotorcyclepartsonl...php?i=zs125-30
Can anyone help me out with a.) if adjusting it would work and b.) which screw is the idle screw?
Thank you in advance.
-
#2 Re: Adjusting the Idle Screw
-
#3 Re: Adjusting the Idle Screw
- Join Date
- Jul 2013
- Location
- china
- Posts
- 16
07-06-2015, 10:06 PMHello,
idle is stationary right? i clicked on your link and found the screw
http://www.chinesemotorcyclepartsonl...20300031-2.jpg
it's the screw beneath the dekni japan logo.
If you haven't been on the road for so long i recommend to first change your oil, that might solve your biggest problems.
Good luck.
« Previous Thread | Next Thread » |
Similar Threads
-
CF650NK/TK idle speed? raised idle after throttle body clean..
By Wald0 in forum MaintenanceReplies: 8Last Post: 11-16-2013, 12:39 PM -
Too rich or too lean, which direction to turn the air screw pls?
By Genesequas in forum Parts DeskReplies: 9Last Post: 01-12-2013, 09:42 AM -
I'm having a lot of problems adjusting my valve clearences
By spencer2004 in forum MaintenanceReplies: 17Last Post: 08-15-2012, 10:09 AM -
air fuel screw pulse adrenaline 125
By pulsepat in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 07-07-2011, 10:04 PM -
Standard Air/Fuel mixture and Idle screw Settings for a Mikilon M96 125-SB
By da beard in forum MaintenanceReplies: 3Last Post: 10-23-2009, 06:42 PM
комедии 2024 онлайн...
04-23-2024, 02:09 AM in Off Topic Discussions