Results 1 to 10 of 19
|
Hybrid View
-
#1 How does Ssr lazer 5 moped vaccum lines connect
- Join Date
- Mar 2016
- Location
- San diego
- Posts
- 11
03-22-2016, 06:01 AMI have made a bottom end swap on my ssr lazer 5 moped but i did not make a note of how the vaccum lines were connected can any one tell me how to 1re connect it.
Thanks
-
#2 Re: How does Ssr lazer 5 moped vaccum lines connect03-22-2016, 08:44 AM
Vacuum lines!?
When this engine was designed, vacuum was not invented yet.
Seriously, would you be so kind to elaborate a bit more your problem?Ask me nothing - I DO NOT speak english. Really...
-
#3 Re: How does Ssr lazer 5 moped vaccum lines connect
- Join Date
- Mar 2016
- Location
- San diego
- Posts
- 11
03-22-2016, 04:30 PMThe bike is a 2009 SSR lazer 5 moped has a honda horizontal clone engine it has a line comming from the head that goes to a air filter and has some hoses that go from the filter to a tube. i figured it was a vaccume line. The had been neglected and and the hoses have disentegreted so i dont know how to conect them
Last edited by Electrorange; 03-22-2016 at 05:58 PM.
-
#4 Re: How does Ssr lazer 5 moped vaccum lines connect03-22-2016, 06:12 PM
Oooooh, thaaat...
Don't bother.
This is thing for environmentally enlightened folks. I don't know is this system even marginally improves emission, but for sure nothing is gonna go south if you simply blank all the holes there and throw those rotten hoses into recycle bin.Ask me nothing - I DO NOT speak english. Really...
-
#5 Re: How does Ssr lazer 5 moped vaccum lines connect
- Join Date
- Mar 2016
- Location
- San diego
- Posts
- 11
03-22-2016, 06:46 PMSeriously, would you be so kind to elaborate on my problem. Id like to solve the issue
-
#6 Re: How does Ssr lazer 5 moped vaccum lines connect03-22-2016, 08:51 PM
It does not need it to run, only to cap it off, that is my interpretation.
-
#7 Re: How does Ssr lazer 5 moped vaccum lines connect03-22-2016, 09:21 PM
Ha, with my English! That would be the day!
It is too much English words for me in one day.
Long story - short: those smog pumps, fume re-circulation systems and all the rest imaginable systems that, allegedly, decrease emissions, if they are in order, DO NOT improve or decrease engine performance (at least on our lil' horizontals).
It is not problem when those contraptions are somewhere on the exhaust system, but if they are in the intake system, on air filter, intake manifold... If some of those attached hoses cracks or slips off, that may infringe carb set up, cause engine overheating, dust to be sucked into engine, and few more problems.
So, I'm recommending you to remove this pipe from the head and simply blank this hole with some DIY coverlid, and also (if any) to stuck in something in this... outlet on the intake manifold. Don't forget to close holes on the air box too.
If you insist to put all where it was before, please submit some photos, so we can see which system you have there, in order to solve the puzzle.Ask me nothing - I DO NOT speak english. Really...
« Previous Thread | Next Thread » |
Similar Threads
-
SSR Lazer 5 moped?
By birdmove in forum StreetReplies: 16Last Post: 03-11-2015, 09:30 AM -
DIY: Steel Mesh Brake Lines
By TrailOut in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 07-27-2013, 01:09 PM -
Pulse Adrenaline in 2 lines
By japanzzz in forum StreetReplies: 1Last Post: 11-11-2012, 09:12 AM -
Pulse Adrenaline in 2 lines
By japanzzz in forum StreetReplies: 0Last Post: 11-10-2012, 11:51 PM -
Sym Jet Moped Carb Settings help ?
By Chronicz in forum MaintenanceReplies: 1Last Post: 05-16-2012, 06:49 PM
Prime Сasual Dating - Real-life...
Yesterday, 08:19 AM in Off Topic Discussions