Thread: Steve's CFMoto 250T-6a Jetmax
Results 41 to 48 of 48
#41 New Handlebar Switches and Hand Guards11-19-2016, 06:25 AM
I have installed new handlebar switches (the installation was pretty straightforward) and found out that the old left one had a broken high beam flash button, and the old right one had a broken tip that was supposed to fix the handlebar switch in place on the handlebar.
I was quite surprised to find out that that tip was plastic rather than metal.
I also installed cheap plastic taobao hand guards on the scooter. Now it's much more comfortable to ride in the rain and in cold weather.All good things happen after 3,000 rpm.
#42 Re: New Handlebar Switches and Hand Guards12-02-2016, 12:07 AM
Just got back from a week-long trip. It's a pleasant surprise that the scooter battery took a week of no riding just fine, and the scoot started as usual. The only annoyance was the fact that the whole dashboard (except for idiot lights) went dead all of a sudden without any obvious reason. A day later though the dashboard magically came to life all by itself.All good things happen after 3,000 rpm.
#43 Winter Riding12-15-2016, 11:32 PM
It has finally gotten real cold in Nanjing, and once again I'm impressed with the scoot's fairing. Still, I'm getting me one of those aprons you see locals riding in, since I believe it will enhance my winter riding hundredfold.
Update: I got my apron from Taobao, and indeed it made winter riding much more comfortable! Wonder why I didn't think of doing it last winter!
Last edited by Steve_Halt; 01-06-2017 at 05:20 AM. Reason: UpdateAll good things happen after 3,000 rpm.
#44 Jetmax Tranny01-06-2017, 05:19 AM
Hello my non-existent readers!
I wonder if anyone has ever thought of / tried replacing original Jetmax's clutch, variator pulley and torque driver with Japanese scooter parts (Yamaha / Honda / Suzuki / Kawasaki)? If yes, and if it worked well, I'd be super happy if you could give some suggestions here.
I plan to look into upgrading my transmission this summer - might as well look into Japanese mods.All good things happen after 3,000 rpm.
#45 Topbox Mount Broke02-10-2017, 10:26 AM
No curb-jumping; never loaded more than a rain racket and a few bungee cords in my top box. It just happened.
The thing that frustrates me most (besides having to wait for the part for over a week since nobody stocks spares for Jetmax any longer) is the fact that it is all not real metal.
It may be painted like metal and feel like steel on the outside, yet inside it's some bread-like porous rice crap.
What a pity Chunfeng, what a pity.All good things happen after 3,000 rpm.
02-10-2017, 02:42 PM
Its aluminum cast. Its caused most probably by vibrations.
If overloaded it has no elastic range and crack from one moment to next.
That's the typical compromise between weight and durability
Sent from my GN8003 using TapatalkSWM RS500R, Shineray X2, R1200GS LC , HD Lowrider sidecar
#47 Re: Steve's CFMoto 250T-6a Jetmax
#48 Re: Steve's CFMoto 250T-6a Jetmax02-21-2017, 10:57 AM
Got a new handle from taobao and finally fund time to install it. As good as new :)All good things happen after 3,000 rpm.
|« Previous Thread | Next Thread »|
By bikerdoc in forum ScooterReplies: 183Last Post: 05-29-2016, 04:49 AM
By Steve_Halt in forum StreetReplies: 431Last Post: 03-19-2016, 06:45 AM
By vintner in forum Welcome to MCM!Replies: 20Last Post: 08-24-2012, 10:24 PM
By joema in forum MaintenanceReplies: 1Last Post: 11-23-2011, 03:13 AM
By bikerdoc in forum ScooterReplies: 11Last Post: 07-26-2011, 04:00 AM